Install PCD 12.6

[Cameron Whitehead]

I just used to PUT tool to get the install media for CUCM 12.5 and PCD 12.6.  The issue I am having is that the software download I got has a Bootable ISO for PCD however all the documentation says I should get an OVA that has the install media packaged inside.  Am I missing something?  I cannot find an OVA for this anywhere.

[Jaime Valencia · Accepted solution]

You can just deploy the CUCM OVA with the right specs and use the ISO

https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/virtualization-cisco-prime-collaboration-deployment.html

[Pearson]

Are you trying to install PCD or CUCM?

If PCD you should just be able to deploy the ova and when powered on the install should run.

[Anthony Holloway]

Maybe you didn't see that they said it was PCD and that they received an ISO as opposed to an OVA. ;)

[stuart.pannell]

So unless you are installing on the BE6K then there is not a configuration within the CUCM OVA for PCD 2vCPU, 4GB RAM and 80GB Disk

https://www.cisco.com/web/software/283088407/145119/cucm.ova.README.pdf

Do you know if the BE6K configuration will be available to select when installing on non BE6K platforms?