cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
311
Views
5
Helpful
4
Replies
Lukas Vinkler
Contributor

Jabber 11.1 Cloud Deployment - SaveChatHistoryToExchangeOperationMode parameter

Hello!

 

I have done some testing with Jabber 11.1 in hybrid deployment (CUCM and WebEx Connect for IM) and this parameter just do nothing. Am I right that this parametr SaveChatHistoryToExchangeOperationMode in this particular deployment does nothing? And it is only for on-premises deployment?

Thanks for sharing ideas.

1 ACCEPTED SOLUTION

Accepted Solutions
jguggehe
Cisco Employee

According to the config reference, this setting applies only to on-prem and Office365 deployments:
 

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/11_0/CJAB_BK_C1247C0B_00_cisco-jabber-parameters-reference-guide/CJAB_BK_C1247C0B_00_cisco-jabber-parameters-reference-guide_chapter_00.html#CJAB_RF_S4649033_00

 

Thanks,
John

Please be sure to rate helpful replies.

For more assistance, please visit the PDI Technical Advisors at http://www.cisco.com/go/pdita

View solution in original post

4 REPLIES 4
jguggehe
Cisco Employee

According to the config reference, this setting applies only to on-prem and Office365 deployments:
 

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/11_0/CJAB_BK_C1247C0B_00_cisco-jabber-parameters-reference-guide/CJAB_BK_C1247C0B_00_cisco-jabber-parameters-reference-guide_chapter_00.html#CJAB_RF_S4649033_00

 

Thanks,
John

Please be sure to rate helpful replies.

For more assistance, please visit the PDI Technical Advisors at http://www.cisco.com/go/pdita

View solution in original post

Yes, that is correct and I am aware of that, but there is also this documentation:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/11_0/CJAB_BK_D657A25F_00_deployment-installation-guide-jabber-110/CJAB_BK_D657A25F_00_deployment-installation-guide-jabber-110_chapter_01110.html#CJAB_RF_SAB1DB8B_00

Version of Cisco Jabber for Windows

Supported Servers

10.6

Microsoft Exchange 2013

Microsoft Exchange 2010

11.0

Microsoft Office 365

Microsoft Exchange 2013

Microsoft Exchange 2010

But on the bottom line there is this note: This feature can only be enabled if users have a Cisco Unified Communications Manager account.

And this make me concern. As it is not so clear, I am wondering about other experience.

Lukas

 

Hi Lukas,

 

You aren't the only one.    We have a major deployment stalled because of this issue.    Anyone else who can shed some light on this?   We currently have a TAC case open, but no real progress.     Hard to sell the upgrade when it breaks this feature.

 

-Craig

Have somebody try this setup, because documentation is one thing but reality second, I am not able to do that at all.

 

Lukas

Content for Community-Ad

Spotlight Awards 2021

This widget could not be displayed.