09-23-2015 02:55 AM - edited 03-17-2019 05:32 PM
Hello!
I have done some testing with Jabber 11.1 in hybrid deployment (CUCM and WebEx Connect for IM) and this parameter just do nothing. Am I right that this parametr SaveChatHistoryToExchangeOperationMode in this particular deployment does nothing? And it is only for on-premises deployment?
Thanks for sharing ideas.
Solved! Go to Solution.
09-23-2015 01:55 PM
According to the config reference, this setting applies only to on-prem and Office365 deployments:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/11_0/CJAB_BK_C1247C0B_00_cisco-jabber-parameters-reference-guide/CJAB_BK_C1247C0B_00_cisco-jabber-parameters-reference-guide_chapter_00.html#CJAB_RF_S4649033_00
Thanks,
John
Please be sure to rate helpful replies.
For more assistance, please visit the PDI Technical Advisors at http://www.cisco.com/go/pdita
09-23-2015 01:55 PM
According to the config reference, this setting applies only to on-prem and Office365 deployments:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/11_0/CJAB_BK_C1247C0B_00_cisco-jabber-parameters-reference-guide/CJAB_BK_C1247C0B_00_cisco-jabber-parameters-reference-guide_chapter_00.html#CJAB_RF_S4649033_00
Thanks,
John
Please be sure to rate helpful replies.
For more assistance, please visit the PDI Technical Advisors at http://www.cisco.com/go/pdita
09-24-2015 02:46 AM
Yes, that is correct and I am aware of that, but there is also this documentation:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/11_0/CJAB_BK_D657A25F_00_deployment-installation-guide-jabber-110/CJAB_BK_D657A25F_00_deployment-installation-guide-jabber-110_chapter_01110.html#CJAB_RF_SAB1DB8B_00
Version of Cisco Jabber for Windows | Supported Servers |
---|---|
10.6 | Microsoft Exchange 2013 Microsoft Exchange 2010 |
11.0 | Microsoft Office 365 Microsoft Exchange 2013 Microsoft Exchange 2010 |
But on the bottom line there is this note: This feature can only be enabled if users have a Cisco Unified Communications Manager account.
And this make me concern. As it is not so clear, I am wondering about other experience.
Lukas
10-08-2015 12:12 PM
Hi Lukas,
You aren't the only one. We have a major deployment stalled because of this issue. Anyone else who can shed some light on this? We currently have a TAC case open, but no real progress. Hard to sell the upgrade when it breaks this feature.
-Craig
10-02-2015 04:04 AM
Have somebody try this setup, because documentation is one thing but reality second, I am not able to do that at all.
Lukas
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide