08-01-2012 09:36 PM - edited 03-17-2019 02:31 PM
Jabber Client for Windows doesn't show other users on search. All these users are available in Presence and created manually in CUCM. I am using just 4 users and they all logged into Jabber Client.
Solved! Go to Solution.
08-02-2012 10:40 AM
Hi
In that case, you need to set up Jabber for 'UDS'. This involves creating an XML file and uploading it to your CUCM TFTP server.
Details here: http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Windows/9_0_1/b_jabber_win_icg_chapter_0100.html
Regards
Aaron
08-02-2012 12:09 AM
Hi
What directory config have you set up? Have you configured a Jabber config file in TFTP?
Do the userIDs of the users in CUCM match the userIDs of the LDAP users?
Aaron
08-02-2012 07:13 AM
There is no LDAP integration. Users are manually added in CUCM and Presence is synced with CUCM.
Jabber client is been added in CUCM and registered.
08-02-2012 09:50 AM
Hi,
Please provide a problem report (help -> Reprt a problem...) to investigate.
Thanks,
Maqsood
08-02-2012 10:15 AM
Hi
What version of CUCM do you have?
By default, JfW uses EDI - it uses the logged-on user on the workstation to access Active Directory to search for users.
If you are on 8.6.2 of CUCM, you can have it search the CUCM directory instead.
If you are pre8.6.2, then LDAP is mandatory.
Regards
Aaron
08-02-2012 10:35 AM
CUCM 8.6.2
Presence 8.6.3
Jabber Clients are not registered in CUCM.
I don't know have to attach problem report file here.
08-02-2012 10:40 AM
Hi
In that case, you need to set up Jabber for 'UDS'. This involves creating an XML file and uploading it to your CUCM TFTP server.
Details here: http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Windows/9_0_1/b_jabber_win_icg_chapter_0100.html
Regards
Aaron
08-02-2012 01:04 PM
That resolve my issue. Here is the xml file I uploaded to CUCM.File name is jabber-config and restarted fttp services.
08-02-2012 01:07 PM
Hi Aaron,
Thanks for help.
I am having same problem for Jabber iPad. I can not do search from my existing contacts.
08-02-2012 01:13 PM
Hi Deepak
So here's where it gets interesting. The various Jabber clients don't have much in common, so it's important to read the admin guide for each.
Jabber for iPad doesn't use UDS, it requires LDAP - you must have LDAP, and you must have users in it with UserIDs that match the UserID in CUCM. By default the sAMAccountName must match, but you can map the UserID in CUCM to a different field in LDAP if you need to.
Regards
Aaron
11-08-2012 04:09 AM
Hi Aaron,
Can you clarify you comments regarding Jabber for iPad?
Must have LDAP - does this mean CCM must be synced to LDAP and using LDAP authentication for ipads?
We have a customer that has a mapping of User ID = employeeNumber (in CCM LDAP directory setting and CUPS,
Cisco Jabber LDAP Attribute Mapping)
Jabber for Windows is configured to mapp this attribute in the XML file:
How do we achive the same mapping for the Jabber for iPad clients? The contacts are just showing as employeenumber@domain.net
Thanks,
James
11-11-2012 12:39 PM
Hi
From this section of the iPad config doc (http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/iPad/9_1/Admin/JABP_BK_J3C828CB_00_jabber-for-ipad-admin-9-1-1_chapter_0100.html#task_E460F6B49C184DFFA61AD6E919E7066E) it looks like Jabber on iPad uses the CUPS attribute mappings.
I would configure your uid element in that config page to be employeeNumber. I would also set up your AD schema to make employeeNumber an indexed attribute to speed up performance - I think by default this is not done. It's also not part of the data replicated to global catalogs so if you need to use the GC service it would be worth enabling that as well.
Principal Engineer at Logicalis UK
Please rate helpful posts...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide