08-08-2016 02:51 AM - edited 03-17-2019 06:17 PM
Hi
Can I configure jabber from outside network without vpn for both IM and Phone services using NAT?. I have one BE6000S installed.
08-08-2016 03:34 AM
Hi Samsam926,
NATing CUCM and CUIMP is not supported deployment option. You must try positioning Collaboration Edge/Mobile & Remote Access (MRA) solution for Virtual Private Network-less Jabber.
HTH,
Regards,
Mohammed Noor
08-08-2016 03:50 AM
Dear Mohammed,
I got BE6000S-fxo-m2-k9 installed in my environment , is it possible to deploy Collaboration Edge/Mobile without purchasing any device or license
Kind Regards
Sameer
08-08-2016 05:42 AM
You'd need another server where to install EXP-C and EXP-E as you have a 6KS and the apps on that option are fixed, and the required servers are not supported on that platform.
08-08-2016 06:11 AM
With BE6000S you have less options.
For more insight refer below link on licensing and requirement
http://www.cisco.com/c/en/us/products/collateral/unified-communications/business-edition-6000/data_sheet_c78-717454.html
http://www.cisco.com/c/en/us/products/collateral/unified-communications/business-edition-6000/guide-c07-737625.html#_Toc457609056
Regards,
Mohammed Noor
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide