Jabber-Config.xml in Jabber 12.5

[iverson.justin]

It sounds like Jabber-Config.xml has been discontinued in jabber 12.5 is that true?  If so how can I control the interface of jabber now for users?  

[Jaime Valencia · Accepted solution]

Yes, and no, because that depends on the CUCM release, not Jabber release.

UC Manager Configuration Tool—Move your configuration from the jabber-config.xml file into the UC Manager, using our new configuration tool to simplify Jabber deployment. This feature requires Cisco UC Manager 12.5.

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/12_5/jabw_b_releasenotes_125.html

[Hafthor Hilmarsson O'Connor]

and where is "UC Manager Configuration Tool" located ?

I have looked here and there and googled without success of finding it.

---

@Jaime Valencia wrote:

Yes, and no, because that depends on the CUCM release, not Jabber release.

UC Manager Configuration Tool—Move your configuration from the jabber-config.xml file into the UC Manager, using our new configuration tool to simplify Jabber deployment. This feature requires Cisco UC Manager 12.5.

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/12_5/jabw_b_releasenotes_125.html

---

[Jaime Valencia]

It's a UC service

[Hafthor Hilmarsson O'Connor]

sorry might be a misunderstanding, I am looking for a way to import the old jabber-config.xml into the uc services part , rather then doing it all manualy.

[Jaime Valencia]

I don't know of any tool to do that, not sure why they named that feature a "tool", but you need to re-create the config file as a UC service manually, when I did the upgrade I thought it would detect I had a config file and do the job, but it didn't, and I simply opened the file and used the drop-downs to use the same options in the UC service.