cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
5263
Views
0
Helpful
7
Replies
Syed Akbar Ali
Beginner

Jabber for Everyone with cucm ver 9.1.1

Dear support,

As we have plan to use "Jabber for Everyone". already we have upgrade the cucm ver 9.1.1  ,

So how can use of jabber for everyone so please provide complete procedure  and requirement further. does we require to install

Cisco Unified Presence also.......or not.

Regard

syed


2 ACCEPTED SOLUTIONS

Accepted Solutions
Jaime Valencia
Hall of Fame Cisco Employee

I'm not sure about the licensing and ordering part, but from a tech point of view.

You just need to follow the regular IM&P install and config guides, you'll just configure the IM&P integration and give your users IM and presence capabilities.

Yes, you need the IM&P server for this.

You need to start by reviewing the Install and config guides, then the Jabber config guide

CUPS / IM&P

http://www.cisco.com/en/US/products/ps6837/tsd_products_support_series_home.html

Cisco Jabber for Windows 9.1.x Installation and  Configuration Guide

http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Windows/9_1/JABW_BK_CA48EE46_00_cisco-jabber-for-windows-administration.html

If you're going to use other Jabber client, remember, all you get is IM and Presence, no calls, call control, etc.

If you want any of those, you have to pay for those capabilities.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

View solution in original post

Oh I forgot to mention,

That from what I've read and understand, Jabber for every one basically starts with a CUCM and requires COP files to be dowloaded and applied to enable smart devices to make and recieve voice calls ( no presence or jabber windows/mac soft clients). 

If presence is required and you want to use the jabber softclient (windows/mac), then you will need get with your account team to get the necessary licenses and presence server software deployed/intergrated.

Here's some really good info explaining the details, which is quite good.

http://communities.cisco.com/docs/DOC-29265


http://www.cisco.com/web/products/voice/jabber.html

And if your a Partner, here's some excellent sales and marketing Web casts.


http://www.cisco.com/web/partners/sell/technology/collaboration/jabber_for_everyone.html

Regards,

Helio

View solution in original post

7 REPLIES 7
Jaime Valencia
Hall of Fame Cisco Employee

I'm not sure about the licensing and ordering part, but from a tech point of view.

You just need to follow the regular IM&P install and config guides, you'll just configure the IM&P integration and give your users IM and presence capabilities.

Yes, you need the IM&P server for this.

You need to start by reviewing the Install and config guides, then the Jabber config guide

CUPS / IM&P

http://www.cisco.com/en/US/products/ps6837/tsd_products_support_series_home.html

Cisco Jabber for Windows 9.1.x Installation and  Configuration Guide

http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Windows/9_1/JABW_BK_CA48EE46_00_cisco-jabber-for-windows-administration.html

If you're going to use other Jabber client, remember, all you get is IM and Presence, no calls, call control, etc.

If you want any of those, you have to pay for those capabilities.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

Hi Jaime / support team,

As I have upgrades the cucm to version 9.1.1 and installed the cisco presence server 8.6

So plz assist with steps by steps configuration to make  use of cisco jabber IM and presence  & cisco jabber for windows on production environment.

Regards

Syed

Jaime Valencia
Hall of Fame Cisco Employee

I already provided the links...

Sent from Cisco Technical Support iPad App

HTH

java

if this helps, please rate
Jaime Valencia
Hall of Fame Cisco Employee

And you cannot have CUCM 9.1.1 and CUPS 8.6, you need IM&P 9.1.1
Versions need to match


Sent from Cisco Technical Support Android App

HTH

java

if this helps, please rate

Hello Jaime,

how to configure interdomain federation for Cisco Jabber for Windows on Cisco Unified Presence or Cisco Unified Communications IM and Presence.

As we have WAN Connection between two different Domain name company in the same country . one company have setup of cucm 7.x and presence 8.6  another company have cucm 9.1.1 and IM & Presence 9.1.1 

So Could please provide the steps to configure the interdomain federation for Cisco Jabber for Windows 9.x on Cisco Unified Presence 8.5 or Cisco Unified Communications IM and Presence 9.1.1

Thanks in advance for your kind support.

Regards

SAA

Hi,

If understand the following cisco documentation correctly, the XMPP federation is only supported between 9.x or 8.x deployments, not 9.x to 8.x.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/im_presence/interdomain_federation/9_1_1/CUP0_BK_IB27169E_00_interdomain-federation-integration-guide-9_1_1_chapter_01010.html#CUP0_RF_X18F91C4_00

XMPP federation overview 9.x

IM and Presence                      Release 9.0 supports XMPP federation with the following enterprises:

  • Cisco WebEx Connect Release 6.0
  • IBM Sametime Release 8.2 and 8.5
  • GoogleTalk
  • (Another) IM and Presence Release 9.0                             enterprise

http://www.cisco.com/en/US/docs/voice_ip_comm/cups/8_0/english/integration_notes/Federation/XMPPConfig_chapter.html#wp1065823

XMPP Federation Overview 8.x

Cisco Unified Presence Release 8.x supports XMPP federation with the following enterprises:

Cisco WebEx Connect Release 6.0

IBM Sametime Release 8.2 and 8.5

GoogleTalk

(Another) Cisco Unified Presence Release 8.x enterprise

Oh I forgot to mention,

That from what I've read and understand, Jabber for every one basically starts with a CUCM and requires COP files to be dowloaded and applied to enable smart devices to make and recieve voice calls ( no presence or jabber windows/mac soft clients). 

If presence is required and you want to use the jabber softclient (windows/mac), then you will need get with your account team to get the necessary licenses and presence server software deployed/intergrated.

Here's some really good info explaining the details, which is quite good.

http://communities.cisco.com/docs/DOC-29265


http://www.cisco.com/web/products/voice/jabber.html

And if your a Partner, here's some excellent sales and marketing Web casts.


http://www.cisco.com/web/partners/sell/technology/collaboration/jabber_for_everyone.html

Regards,

Helio

Create
Recognize Your Peers
Content for Community-Ad