jabber for iphone with cucm 10.5

[abd88elhak]

Hi

i would like to configure cisco jabber for iphone for the purpose of using my smartphone for calls and instant Messaging

my question is : i will need COP file uploaded into CUCM 10.5 or already integrated  and also the configuration required 

regards

[Jaime Valencia]

You don't need any COP files, you just need to install the client on your iPhone and follow the configuration guide available on cisco.com 

[techsupport]

Dear Jaime,

I Have CUCM 10.5.10000-2 my Jabber CSF for Window is Running But Now I need to Run jabber For android so do I need COP for that ????

[Ratheesh Kumar]

Hi

Below are the software & server requirements

Requirements

Software Requirements

Services

Install the COP file cmterm-android-install-151020.k3.cop.sgn for Android phones and the COP file cmterm-jabbertablet-install-151020.k3.cop.sgn for Android tablet, if you support the following services:

• Secure Phone (Mixed Mode Security)—On Cisco Unified Communications Manager Release 9.1(2) or later.

• Share Line and Graceful Registration under DvO—On Cisco Unified Communications Manager Release 10.5(1) or later.

• Group Configuration (Cisco Supported Field)—On Cisco Unified Communications Manager Release 10.5(2) or later.

Server Requirements

The following are the server requirements for Cisco Jabber for Android in this release:

Service	Software Requirement	Supported Version
IM and Presence	Cisco Unified Communications Manager IM and Presence Service	8.6(2)* and later
	Cisco WebEx Messenger
Telephony	Cisco Unified Communications Manager	8.6(2)* and later
	Cisco Unified Survivable Remote Site Telephony	8.5 and later
Contact Search	Cisco WebEx Messenger
	Microsoft Active Directory	2008 R2 and later
	OpenLDAP	2.4 and later
	Cisco Unified Communications Manager User Data Service (UDS)	9.1(2) and later For 9.1(2), use the following COP file: cmterm-cucm-uds-912-5.cop.sgn
Voicemail	Cisco Unity Connection	8.6(2)* and later
Conferencing	Cisco Meeting Server (CMS)	2.0 and later
	Cisco TelePresence Server	3.1 and later
	Cisco TelePresence MCU	4.3 and later
	Cisco ISR PVDM3	Cisco Unified Communications Manager 8.6(2)* and later
	Cloud CMR	Cisco WebEx Meetings Server with Collaboration Meeting Room
	Cisco WebEx Meetings Server	2.0 and later Cisco Jabber for Windows supports 1.5 and later
	Cisco WebEx Meeting Center	WBS29 and later
	Cisco WebEx Meetings Client	4.5 and later
Remote Access	Cisco Adaptive Security Appliance Only applies to Cisco Jabber for Android.	8.4(1) and later
	Cisco AnyConnect Secure Mobility Client	4.0.01287 and later For more information, refer to the Remote Access section.
	Cisco Expressway C	8.1.1 and later
	Cisco Expressway E	8.1.1 and later

[Jaime Valencia]

No, you don't need anything, but you might want to consider upgrading to 10.5(2) which is the maintenance release on the 10.5 train

[Nagajothi Thangapandian]

These guides will give you additional info on config part:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/10_5/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber_chapter_0110.html#JABI_TK_C15AA350_00

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/10_5/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber_chapter_0101.html