10-06-2022 08:58 AM
I have a Cisco 4321 gateway with a PRI on it. It connects to CUCM using a SIP trunk. When I make an outbound call I can see the caller ID on the SIP leg of the call but I don't see the name going out to the telco when I run debug ISND q931. See below.
*Oct 6 15:35:54.430: //28521/E6938F000003/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 200 OK
Via: SIP/2.0/TCP 10.7.154.47:5060;branch=z9hG4bK6777984653064c
From: "Cameron" <sip:1301034985@x.x.x.x>;tag=89647999~34517b5a-9c47-4b43-9e8a-a83f9cb332cd-55494318
To: <sip:9XXXXXXXXXX@x.x.x.x>
Date: Thu, 06 Oct 2022 15:35:54 GMT
Call-ID: e6938f00-1ee1638e-476b2e-2f9a070a@10.7.154.47
CSeq: 101 CANCEL
Session-ID: 5c59c2db00105000a000e44e2d3ed9d9;remote=4d0dc4c48d5e5fd8af84325ec2f76abd
Content-Length: 0
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98397
Exclusive, Channel 23
Calling Party Number i = 0x2181, '1301034985'
Plan:ISDN, Type:National
Called Party Number i = 0xA1, 'XXXXXXXXXX'
Plan:ISDN, Type:National
*Oct 6 15:32:11.090: ISDN Se0/1/0:23 Q931: RX <- CALL_PROC pd = 8 callref = 0x8082
Channel ID i = 0xA98397
Exclusive, Channel 23
Solved! Go to Solution.
10-06-2022 12:14 PM
10-06-2022 10:55 AM
AFAICT this works as designed. The name part of the SIP dialogue would not be carried over to the ISDN side.
10-06-2022 11:35 AM
If that is the case how can I get the name to show up for outbound calls?
10-06-2022 11:48 AM - edited 10-06-2022 11:54 AM
AFAIK you cannot. Not with a ISDN connection to PSTN.
10-06-2022 11:58 AM
That seems like a massive hole in the functionality. I know I used to do it with H323 but I don't want to have to move back to that.
10-06-2022 12:14 PM
10-06-2022 12:30 PM
Thanks! Worked like a charm
10-06-2022 09:55 PM
Fantastic, glad to hear that.
10-06-2022 11:51 AM
The PSTN can do that on the DID.
10-06-2022 11:57 AM
Well I can have the Telco put a name on all outgoing calls but my issue is I have different users with different names that need to be sent out for the caller name.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: