cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
1670
Views
0
Helpful
4
Replies
soohyung choi
Beginner

Room Device(Roomkit pro) registered with Webex (L-KITPRO-MS)

L-KITPRO-MS (embedded multipoint)


If the roomkit pro registered with webex ,but we can't do multisites conference using L-KITPRO-MS (embedded multipoint license)

 

Method is unknown. I'd like to know how.

 

Thank you

 

Regards,

2 ACCEPTED SOLUTIONS

Accepted Solutions
Vaijanath Sonvane
VIP Advocate

Hi,

If your endpoint is registered with following call control applications and if you do not have separate MCU resources, then you need embedded MultiSite license to do multi-point ad-hoc video conference.

  •  Cisco Unified Communications Manager (CUCM)
  • Cisco TelePresence Video Communication Server (VCS)
  • Third-party H.323 gatekeepers and standards-based SIP proxies

When you register your endpoint with WebEx Cloud, you do not have option to add other video participants manually. In this case MultiSite license is of no use.

 

Please rate helpful posts and if applicable mark "Accept as a Solution".
Thanks, Vaijanath S.

View solution in original post

You are most welcome!
Please rate helpful posts and if applicable mark "Accept as a Solution".
Thanks, Vaijanath S.

View solution in original post

4 REPLIES 4
Vaijanath Sonvane
VIP Advocate

Hi,

If your endpoint is registered with following call control applications and if you do not have separate MCU resources, then you need embedded MultiSite license to do multi-point ad-hoc video conference.

  •  Cisco Unified Communications Manager (CUCM)
  • Cisco TelePresence Video Communication Server (VCS)
  • Third-party H.323 gatekeepers and standards-based SIP proxies

When you register your endpoint with WebEx Cloud, you do not have option to add other video participants manually. In this case MultiSite license is of no use.

 

Please rate helpful posts and if applicable mark "Accept as a Solution".
Thanks, Vaijanath S.

View solution in original post

Thanks your help

You are most welcome!
Please rate helpful posts and if applicable mark "Accept as a Solution".
Thanks, Vaijanath S.

View solution in original post

Ratheesh Kumar
Engager

Hi there 

For webex devices to use conference feature, you have to use the Webex bridge and use the SIP URI or phone number to dial-in. Thats the only option.

 

Hope this Helps

Cheers
Rath!
***Please rate helpful posts***

Create
Recognize Your Peers
Content for Community-Ad