05-01-2019 01:54 PM
Hi Everyone
I want to explain what I'm trying to do and make sure that I'm correct, recently we had a power outage in our IDF where one of our cube routers is. We don't have fail over configured because to have HSRP on the ISR G2 you have to have the routers on the same segment. So my manager wants me to just move all the calls from the router in the site where I'm at to the cube in the data center. So to make this happen would I just move the SIP trunk that I want the calls to route out of to the top of the route group members list, and then move the route group to the top of the route list members information section. Thanks in advance for your help and have a great day.
Eric
Solved! Go to Solution.
05-01-2019 06:11 PM
You can just move the trunk to the top of the list in the route group. The route list does not need to be touched if it already references the route list.
05-01-2019 06:11 PM
You can just move the trunk to the top of the list in the route group. The route list does not need to be touched if it already references the route list.
05-02-2019 08:02 AM
Thanks for the reply
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide