cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
323
Views
30
Helpful
9
Replies
Highlighted
Beginner

Syncing AD Photos to Jabber

Hello Team, 

 

Would like to have your assist with the xml configuration so that i can pull the photos stored in the AD to Jabber

 

 

 

3 ACCEPTED SOLUTIONS

Accepted Solutions
Highlighted
VIP Mentor

Re: Syncing AD Photos to Jabber

It took me a minute to find the document, and I would say I'm "well versed" with Jabber. So, I can only imagine a new person to Jabber administration will find it hard to locate as well.

Here it is:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/12_8/cjab_b_deploy-jabber-on-premises-128/cjab_b_deploy-jabber-on-premises-128_chapter_0100.html#CJAB_RF_C273D123_00

Anthony Holloway

View solution in original post

Highlighted
VIP Mentor

Re: Syncing AD Photos to Jabber

So, if you have your Jabber clients using AD/LDAP for Contact search and resolution (Jabber > Help > Show Connection Status > Directory) then the only option is the AD attributes, and you can't even use the web server at all. However, if you're instead using UDS, and not AD/LDAP, then the only option you have is the Web Server and not the AD attributes. Does that help?

Anthony Holloway

View solution in original post

Highlighted
Hall of Fame Cisco Employee

Re: Syncing AD Photos to Jabber

LDAP can use the binary object which is the default, OR can use a web server, which is the first set of parameters under URI substitution.

 

PhotoUriWithToken

Specifies a photo URI with a directory attribute as a variable value.

The parameter applies to LDAP directory integrations.

 

 

UDS can ONLY use a web server.

HTH

java

if this helps, please rate

View solution in original post

9 REPLIES 9
Highlighted
Hall of Fame Cisco Employee

Re: Syncing AD Photos to Jabber

This is covered in the Jabber documentation, have you reviewed? Unless you use a different value for the parameter, there's not even a need for it. That is also explained in the documentation. 

HTH

java

if this helps, please rate
Highlighted
VIP Mentor

Re: Syncing AD Photos to Jabber

It took me a minute to find the document, and I would say I'm "well versed" with Jabber. So, I can only imagine a new person to Jabber administration will find it hard to locate as well.

Here it is:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/12_8/cjab_b_deploy-jabber-on-premises-128/cjab_b_deploy-jabber-on-premises-128_chapter_0100.html#CJAB_RF_C273D123_00

Anthony Holloway

View solution in original post

Highlighted
Beginner

Re: Syncing AD Photos to Jabber

Thanks alot Anthony Holloway, That was really helpful
Highlighted
Beginner

Re: Syncing AD Photos to Jabber

Hello Anthony,
I have read the document and I have a query is that can be done without a webserver, It is not clear to me
Highlighted
VIP Mentor

Re: Syncing AD Photos to Jabber

So, if you have your Jabber clients using AD/LDAP for Contact search and resolution (Jabber > Help > Show Connection Status > Directory) then the only option is the AD attributes, and you can't even use the web server at all. However, if you're instead using UDS, and not AD/LDAP, then the only option you have is the Web Server and not the AD attributes. Does that help?

Anthony Holloway

View solution in original post

Highlighted
Hall of Fame Cisco Employee

Re: Syncing AD Photos to Jabber

LDAP can use the binary object which is the default, OR can use a web server, which is the first set of parameters under URI substitution.

 

PhotoUriWithToken

Specifies a photo URI with a directory attribute as a variable value.

The parameter applies to LDAP directory integrations.

 

 

UDS can ONLY use a web server.

HTH

java

if this helps, please rate

View solution in original post

Highlighted
VIP Mentor

Re: Syncing AD Photos to Jabber

Huh, you don't say.

Anthony Holloway
Highlighted
Beginner

Re: Syncing AD Photos to Jabber

@ Jaime Valencia @ Anthony Holloway

That was really helpful, you guys rock :)

Thank you
Highlighted
Beginner

Re: Syncing AD Photos to Jabber

Hey Anthony,

it's still not working, i'm not sure why
this is the xml configuration

<?xml version="1.0" encoding="utf-8"?>
<config version="1.0">
<Client>
<DisableRemoteDesktopControl>false</DisableRemoteDesktopControl>
</Client>
<Directory>
<PhotoSource>thumbnailPhoto</PhotoSource>
<BDIPhotoSource>thumbnailPhoto</BDIPhotoSource>
<BusinessPhone>ipPhone</BusinessPhone>
</Directory>
<Options>
<AllowUserCustomTabs>True</AllowUserCustomTabs>
<EnableCalendarIntegration>true</EnableCalendarIntegration>
<CalendarIntegrationType>1</CalendarIntegrationType>
<EnableLoadAddressBook>true</EnableLoadAddressBook>
<Set_Status_Away_On_Inactive>true</Set_Status_Away_On_Inactive>
<Set_Status_Away_On_Lock_OS>true</Set_Status_Away_On_Lock_OS>
<Set_Status_Inactive_Timeout>10</Set_Status_Inactive_Timeout>
<ShowContactPictures>true</ShowContactPictures>
<ShowOfflineContacts>true</ShowOfflineContacts>
<StartCallWithVideo>False</StartCallWithVideo>
<Start_Client_On_Start_OS>true</Start_Client_On_Start_OS>
</Options>
<Phone>
<EnableCallPark>true</EnableCallPark>
</Phone>
<Policies>
<AlertOnAvailableEnabled>true</AlertOnAvailableEnabled>
<DirectoryServerType>UDS</DirectoryServerType>
<Disallowed_File_Transfer_Types>.exe;.msi</Disallowed_File_Transfer_Types>
<Disallow_File_Transfer_On_Mobile>true</Disallow_File_Transfer_On_Mobile>
<EnableCallPickup>true</EnableCallPickup>
<EnableGroupCallPickup>true</EnableGroupCallPickup>
<EnableHuntGroup>true</EnableHuntGroup>
<EnableLocalAddressBookSearch>true</EnableLocalAddressBookSearch>
<EnableOtherGroupPickup>true</EnableOtherGroupPickup>
<EnableP2PDesktopShare>true</EnableP2PDesktopShare>
<EnableSIPURDialling>true</EnableSIPURDialling>
<EnableVideo>true</EnableVideo>
<File_Transfer_Enabled>true</File_Transfer_Enabled>
<ForceDevicePin>true</ForceDevicePin>
<ForwardVoicemail>true</ForwardVoicemail>
<Screen_Capture_Enabled>true</Screen_Capture_Enabled>
<ShowScreenCaptureButton>true</ShowScreenCaptureButton>
<ServiceDiscoveryExcludedServices>WEBEX</ServiceDiscoveryExcludedServices>
<Telephony_Enabled>true</Telephony_Enabled>
<Voicemail_Enabled>true</Voicemail_Enabled>
</Policies>
<Presence>
</Presence>
<Voicemail>
</Voicemail>
</config>
CreatePlease to create content
Content for Community-Ad

Cisco COVID-19 Survey