cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1192
Views
0
Helpful
3
Replies

Webex Meeting Server 2.0 - smtp server configuration

Rosario velardi
Level 1
Level 1

Configuring SMTP server for the Webex Meeting Server 2.0, the manual reports:

 

Optionally to enable mail server authentication, select Server authentication enabled.

If you enable authentication, enter the Username and Password credentials necessary for the system to access the corporate mail server.

Emails from the system are sent by admin@<WebEx-site-URL>. Ensure that the mail server can recognize this user.

 

- What exactly means ' Ensure that the mail server can recognize this user' ?

  •  I have to configure the account admin@<WebEx-site-URL> on SMTP server ? (the customer can configure only mail account like admin@customer.com)
  •  Or admin@<WebEx-site-URL> is the 'from' property of the mail, and SMTP server have to accept that 'from' property ?

 

- What happens if Username and Password are not specified ?

 

Thanks

 

 

1 Accepted Solution

Accepted Solutions

Terry Cheema
VIP Alumni
VIP Alumni

You have two options there:

1) Either Use authentication: You would need to create a user account in exchange.

2) Do not use authentication: Leave authentication unchecked and configure exchange to relay the emails from CWMS.

 

"- What exactly means ' Ensure that the mail server can recognize this user' ?"

"- What happens if Username and Password are not specified ?"

It means if you are enabling authentication - create a user account for CWMS in the exchange. If not then have the exchange server configured to relay CWMS emails. Its simple just allow the ip address of CWMS in exchange to accept and relay the email.

If not done it means you wouldn't receive emails from CWMS and as you know emails are primary way of CWMS communicating with users.

Simple way is to leave authentication disabled and configure relay. I have done this couple of times in past without issues.

-Terry

View solution in original post

3 Replies 3

Terry Cheema
VIP Alumni
VIP Alumni

You have two options there:

1) Either Use authentication: You would need to create a user account in exchange.

2) Do not use authentication: Leave authentication unchecked and configure exchange to relay the emails from CWMS.

 

"- What exactly means ' Ensure that the mail server can recognize this user' ?"

"- What happens if Username and Password are not specified ?"

It means if you are enabling authentication - create a user account for CWMS in the exchange. If not then have the exchange server configured to relay CWMS emails. Its simple just allow the ip address of CWMS in exchange to accept and relay the email.

If not done it means you wouldn't receive emails from CWMS and as you know emails are primary way of CWMS communicating with users.

Simple way is to leave authentication disabled and configure relay. I have done this couple of times in past without issues.

-Terry

Thank you very much for your support - Rosario

No problems Rosario - glad to be of any help.

 

-Terry