cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
328
Views
2
Helpful
3
Replies

Workspace room booking check-in

mthijssen
Level 1
Level 1

Hello,

We have te following configuration.

Webex workspaces with room device (desk pro / room bar etc) + room navigator.

The room device is in MTR mode. 

We want to enable checkin / checkout but these options are greyed out.

I also cannot find the options in the webportal.

Does enyone knows how to configure this?

mthijssen_0-1727100200916.png

 

 

1 Accepted Solution

Accepted Solutions

Jonathan Schulenberg
Hall of Fame
Hall of Fame

AFAIK that won’t work if the endpoint is MTR-A. You’ll need to use Microsoft’s equivalent. See Check-in and auto release on Microsoft Teams panels 

View solution in original post

3 Replies 3

Jonathan Schulenberg
Hall of Fame
Hall of Fame

AFAIK that won’t work if the endpoint is MTR-A. You’ll need to use Microsoft’s equivalent. See Check-in and auto release on Microsoft Teams panels 

Thanks Jonathan, do you also know how to configure the room navigator to register as MTR device (I do not get this option when configuring it as navigator outside the room)

I had to phone a friend for this after I couldn't find public documentation. MTP scheduling panels are in beta now, so it's expected that you won't see it on a stable channel device yet. You can join the beta program (select the Cisco Devices for Microsoft Teams project once you're in) or wait for it to be released. The person I asked believed it was targeted for the October release but isn't an authoritative answer.