If I add blfDest property in the same code there is no error and the blf field is added but I need blfDirn / routePartition.
Best Regards, Marcus
Subject: RE: AddPhone BLF fails 9.1 Replied by: Arthur Stuivenberg on 12-09-2013 02:56:51 AM I've got the same issue with cucm 8.5.1.
Also, when I add blfDest with value NULL I get the following error message: "Either an existing internal DN or an external destination can be specified for BLF Speed Dial, but not both."
Someone knows what we're doing wrong?
Subject: RE: AddPhone BLF fails 9.1 Replied by: MARCUS STOLZENBERG on 12-09-2013 03:59:41 AM HI Arthur,
I solved my problem. I collected traces on CUCM and found that the request never reached the CUCM. So I had a deep look on the PHP side and found that PHP generated the error and never send the Soap Call to the server.
I modfied the the xsd file a little bit After this the PHP side was OK and the call was successfully passed to CUCM....
Your "Problem" is that you can not set blfDest to NULL. You must leave it out completely.
Allowed is: <!--You have a CHOICE of the next 2 items at this level--> <blfDirn>?</blfDirn> Or:
Subject: RE: AddPhone BLF fails 9.1 Replied by: Arthur Stuivenberg on 12-09-2013 04:11:11 AM Thanks for your reply, Marcus.
When I did not specify (just left it out) the blfDest field, I got the error that blfDest wasn't specified.. So I edited the .xsd aswell, just changed the minOccurs of the blfDest from 1 to 0, and now it works perfectly.
Subject: RE: AddPhone BLF fails 9.1 Replied by: Arthur Stuivenberg on 12-09-2013 04:29:31 AM Yeah, I also use PHP. I'm not sure, but happy enough it works now!
Subject: RE: AddPhone BLF fails 9.1 Replied by: MARCUS STOLZENBERG on 12-09-2013 04:26:37 AM
Do you use PHP? This is exactly the same change I did.
The only thing I don't know is if the .xsd is OK and PHP is buggy or the otherway round.
We have custom integration jars deployed in CVP that previously leveraged log4j1.x FileAppenders and such to allow for creation of individual LOG files for each integration. For example, integration A resulted in a dedicated integrationA.log file in addit...
Hello, we're using UCCX 12.5. We faced issue, where we cannot change agent's status to Ready after login in to Finesse app and external app controlling our devices. Everything is fine when we are using only Finesse app. Problem is present only in sit...
My request works fine in 184.108.40.20600-20 but gives back 599 unsupported header in 220.127.116.1100-132. DId something change in SU1 ? I have tried with both v12 and v14 database and fails with SU1. Works fine in older verson of CallManager 14, jus...
Hello,1-what is the difference between gadget and non gadget samples. I can see that both can be html files and calling JS at the back end. finessenongadget.js and finesse.js2- Regarding gadgets , if we need to call an API (for example answer ca...