Created by: Paulo Centeno on 29-06-2010 07:42:13 PM Hello I've done the following steps: - Provisioning the build-in-bridge of agent¿s phone for recording, set to on
- Provisioning call recording flag for a line appearance, set as automatic recording
- Create a SIP trunk device for a recorder
- Create Call Recording Profiles, pointing to the SIP Trunk IP
- Provision Route Pattern for the Recorder, pointing to the SIP Trunk The SIP Trunk doesn't receive any INVITE at the beginning of a call from the agent's phone. Obs: The SIP Trunk is working, I can make calls from UCM Phones to phones on the SIP Trunk. What could be missing?
Obs: I'm using UCM 7.1.2 and IP Communicator 184.108.40.206
Subject: RE: BiB Recording setup Replied by: Giggesh Thekkekeloth on 07-07-2010 02:05:57 PM The SIP Trunk doesn't receive any INVITE at the beginning of a call from the agent's phone.
Hi, Can you eloborate on this above said delay, exactly how much time is the delay, as when the INVITE is recieved, how is the connection establisment?
Having an issue with trying to display a CUIC Report Permalink (UCCX) in a browser. When going to the link it shows "Error Fetching datasource info". I made sure that my Permalink has authentication off. I made sure "All Users" have Execute acc...
Hello Community, I have been reading CURRI documentation and I found that it is possible to modify the calling number and called number using CURRI, to apply business rules. I tested it calling from one internal agent to another successfully, bu...
Greetings,I am working on a migration of a client from UCCX 10.6 with CAD to UCCX 12 with Finesse. Their internal team developed a web service that is running on CAD with no issues. When I've embedded the web service into Finesse, some of the Ja...
Hello - I was giving a DX80 at work that someone accidentally dropped and cracked the screen. Most of the touch screen still works except for the top right corner. This is where certain built-in buttons are stored such as turning on/off self v...
Hello, I have a customer in Mexico that is requesting some custom integrations with their Webex Calling. However, I found this on one of Broadsoft’s documents: Currently, Webex Calling Xsi integrations are only supported in the US. I wanted to know i...