cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

C40 Dual View and presentation.

28
Views
0
Helpful
0
Comments
This document was generated from CDN thread

Created by: Travis Lovell on 16-03-2011 07:21:57 AM
Hi, I have a client that has the following issue with their C40 codecs. It is currently setup to display the far side on the main monitor (projector)and the near side on the secondary monitor (LCD screen), as soon as we send presentation it gets displayed on the secondary monitor (LCD screen). The client would like the main monitor (projector) to display the far side and view the near side on the secondary monitor (LCD screen) and as soon as they send presentation they would like it to be displayed on the main monitor (projector) and the far side must then automatically switch to the secondary monitor (LCD screen).
I have gone through all the settings and cannot get this to work, is it a limitation with the codec?


Thanks in advance.

Subject: RE: C40 Dual View and presentation.
Replied by: Jonas Tysso on 16-03-2011 02:50:17 PM
Hi Travis,

This is possible using the Cisco C60 or C90 only. The Cisco C40 does not support custom made layout families such as the ones you describe.

Cheers,

Jonas

Subject: RE: C40 Dual View and presentation.
Replied by: David Houska on 25-03-2011 02:33:33 PM
Hi,
isn't it possible to do this with Cisco TC Console, which supports also the C40?
Thanks

Subject: RE: C40 Dual View and presentation.
Replied by: Jonas Tysso on 25-03-2011 03:17:01 PM
Hi David,

The Cisco C40 only support a limited part of the Video Compositor. It does not support custom layout families. You will only be able to select the available layouts, that is, equal, full screen, large speaker, small speaker and speaker full for selected scenarios.

The Cisco C40 supports all Audio Console features.

Cheers,

JT
CreatePlease to create content
Content for Community-Ad
FusionCharts will render here