Created by: Aswien Behari on 05-11-2009 02:42:45 PM Hi all,
I've upgraded a E20 to version TE184.108.40.206887. The webinterface is not accessible after the upgrade. I'm trying to make a webrequest to the E20 from a C# application, but this will fail of course. I've tried downgrading it, but now the problem exist in v1.0. So what should I do? Is there a problem in the software package of E20?
With kind regards,
Subject: RE: Can't make webrequest to E20 after upgrade Replied by: Oyvind Bjorstad on 05-11-2009 05:23:46 PM Hi Aswien,
The web interface should be working in both TE1.x and TE2.x.
So this sounds like a case for support, so please contact your TANDBERG support representative to get help on your question.
Hi All, This is basically an offshoot of post https://community.cisco.com/t5/management/python-with-axl-updatephone-fail/m-p/4031354/highlight/false#M3313. I took the excellent suggestions made by npetrele, and reviewed the demo at htt...
Hi - i'm having an API commands issue between our Cisco SX80 and Crestron DMPS. When we are receiving incoming calls and go to answer on the Crestron TP, we can't answer it and it basically freezes. When we call the second time, we can accept it without i...
Hii am trying to user CUPI to import users to Unity Connection.LDAP would not be a probleme but i need to import from a attached CUCM Phone SystemAnybody managed to this yet? I tryed ip/vmrest/import/users/ldap which is listening all users if i...
Hi Team,We have moved one of sx20 VC device from one location to another. Now we need to configure the VC device. For touch panel and codec VC VLAn is configured.but not sure how to assign IP to codec and touch panel Since no remote is available...