This document was generated from CDN thread
Created by: Donald Newman on 29-04-2011 03:32:02 PM
I am interested in providing CODEC control of external cameras (via AMX) with the C60. With the MXP CODECs you could use the EXTCAM settings for passing camera commands via the serial port to an AMX control system which is physically connected to the camera. This would allow both near end and far end camera controls to work as if the camera was directly connected to the CODEC.
Will the EXTCAM commands work with the C60 or is there some other mechanism for providing this sort of function.
Thanks for your help,
Donald Newman
Subject: RE: EXTCAM with C60?
Replied by: Roger Boe on 02-05-2011 11:25:07 AM
Hi Donald,
Currently these commands are not available on the C-series, making such functionality unavailable.
Best regards
Roger
