Subject: AW: New Message from Matt Stromske in Cisco JTAPI (JTAPI) - Cisco JTAPI Que Replied by: Andreas Muenstermann on 11-04-2011 01:10:25 PM Hi Matt,
we already started simultaneous calls from a CTI Route Point. So perhaps this is the solution you are searching for? I¿m not sure if a CTI-Port or a Cisco Device provide this functionality.
Von: Cisco Developer Community Forums [mailto:firstname.lastname@example.org] Gesendet: Montag, 11. April 2011 19:03 An: email@example.com Betreff: New Message from Matt Stromske in Cisco JTAPI (JTAPI) - Cisco JTAPI Questions: Initiating calls from a CTI device, multiple addresses
Matt Stromske has created a new message in the forum "Cisco JTAPI Questions":
-------------------------------------------------------------- Hello, I am using JTAPI 7.1. Can addresses that share the same terminal initiate calls sumultaneously?
Example: CTI_PORT_x with DN 111 and DN 222 assigned.
Can DN 111 call party A and DN 222 call party B sumultaneously?
-- To respond to this post, please click the following link:
------------------------ CONET Solutions GmbH, Theodor-Heuss-Allee 19, 53773 Hennef. Registergericht/Registration Court: Amtsgericht Siegburg (HRB Nr. 9136) Geschäftsführer/Managing Directors: Jürgen Zender (Sprecher/Chairman), Anke Höfer This document was generated from CDN thread
Created by: Matt Stromske on 11-04-2011 01:02:30 PM Hello, I am using JTAPI 7.1. Can addresses that share the same terminal initiate calls sumultaneously? Example: CTI_PORT_x with DN 111 and DN 222 assigned. Can DN 111 call party A and DN 222 call party B sumultaneously? Thanks, Matt
Hi Guys, Im looking for a way to setup a separate tab in Finesse desktop with a list of pre-configured buttons that are basically blind conference. It will conference in other uccx applications that play re-recorded messages. Im able to setup th...
When sending a request to the API, there needs to be authentication, and the documents show that this password is stored on the XML as plain text, what options do we have to encrypt this password so it's not showing in plain text?
I am running UCCX 11.6 and would like to populate Custom Call Variables with data. Even if the call does not get routed to a UCCX Agent. Example.... I have a menu and Option 3 routes calls out of UCCX to a shared DN. When the caller selects this Option I ...
I"m having an issue where inbound calls rerouted back to PSTNT failling. Call flow:- ITSP—SIP—CUBE1—SIP—CUCM—CFWD All—SIP—CUBE1—ITSP. The PSTN calling Party receives a long pause, with no ring back, then receives a fast busy. &n...
We are developing our own phone device to support Device Management in Broadworks. And need to know how to add a new device profile type in the Broadworks Sandbox environment. System admin access needed. What procedure is used for this?