Created by: CLARENCE PARKER on 30-04-2010 04:44:06 AM Guys, I am having an issue where I am using the canned "Record" Element with CVP Studio 7 and am getting eh following error in the vxml log: Record_01,element,error,error.badfetch I am also getting the following errors in my vxml gwy log with "debug voip application vxml error" on: 157841: Apr 30 04:21:32.762: //8097//AFW_:/vapp_bgpost: url=http://x.x.x.x:7000/CVP/Server; mime_type=application/x-www-form-urlencoded; len=114; iov_base=audium_vxmlLog=%7C%7C%7Caudio_group$$$initial_audio_group%5E%5E%5E0&audium_action=error&audium_type=error.badfetch The error looks like an audio group problem but all i have in there is a .wav file and just one group and I tested that file with a standard audio element. The settings I have for the record element are: File Type : wav Path: /CVP/en-us/app/"AppName" Filename: blank (to use auto created one) All other fields are default. I havent used the Record element before so I may be missing something obvious. Any feedback would be greatly appreciated.
Subject: Re: New Message from CLARENCE PARKER in Customer Voice Portal (CVP) - Gener Replied by: Janine Graves on 30-04-2010 04:15:35 PM For the error.badfetch during Recording; check your gateway configuration. The gateway dial peer should not be set to use voice-class g711ulaw, NOT 1 voice class 1 which allows either g711 or g729 .
Cisco Developer Community Forums wrote: > CLARENCE PARKER has created a new message in the forum "General > Discussion - All Versions": > > -------------------------------------------------------------- > Guys, >  > I am having an issue where I am using the canned "Record" Element with > CVP Studio 7 and am getting eh following error in the vxml log: > Record_01,element,error,error.badfetch >  > I am also getting the following errors in my vxml gwy log with "debug > voip application vxml error" on: > 157841: Apr 30 04:21:32.762: //8097//AFW_:/vapp_bgpost: > url=http://x.x.x.x:7000/CVP/Server; > mime_type=application/x-www-form-urlencoded; len=114; > iov_base=audium_vxmlLog=%7C%7C%7Caudio_group$$$initial_audio_group%5E%5E%5E0&audium_action=error&audium_type=error.badfetch > The error looks like an audio group problem but all i have in there is > a .wav file and just one group and I tested that file with a standard > audio element. >  > The settings I have for the record element are: > File Type : wav > Path: /CVP/en-us/app/"AppName" > Filename: blank (to use auto created one) >  > All other fields are default. I havent used the Record element > before so I may be missing something obvious. Any feedback would be > greatly appreciated. > -- > To respond to this post, please click the following link: > > <http://developer.cisco.com/web/cvp/forums/-/message_boards/message/2155529> > > or simply reply to this email.
Subject: Re: New Message from Janine Graves in Customer Voice Portal (CVP) - General Replied by: Janine Graves on 30-04-2010 04:42:35 PM Sorry, there was a typo in that last post. For Recording, the gateway dial peer SHOULD be set to use voice-class g711ulaw, NOT voice class 1.
Cisco Developer Community Forums wrote: > Janine Graves has created a new message in the forum "General > Discussion - All Versions": > > -------------------------------------------------------------- > For the error.badfetch during Recording; check your gateway > configuration. The gateway dial peer should not be set to use > voice-class g711ulaw, NOT 1 voice class 1 which allows either g711 or > g729 . > > Cisco Developer Community Forums wrote: > > CLARENCE PARKER has created a new message in the forum "General > > Discussion - All Versions": > > > > -------------------------------------------------------------- > > Guys, > > ÿ > > I am having an issue where I am using the canned "Record" Element with > > CVP Studio 7 and am getting eh following error in the vxml log: > > Record_01,element,error,error.badfetch > > ÿ > > I am also getting the following errors in my vxml gwy log with "debug > > voip application vxml error" on: > > 157841: Apr 30 04:21:32.762: //8097//AFW_:/vapp_bgpost: > > url=http://x.x.x.x:7000/CVP/Server; > > mime_type=application/x-www-form-urlencoded; len=114; > > > iov_base=audium_vxmlLog=%7C%7C%7Caudio_group$$$initial_audio_group%5E%5E%5E0&audium_action=error&audium_type=error.badfetch > > The error looks like an audio group problem but all i have in there is > > a .wav file and just one group and I tested that file with a standard > > audio element. > > ÿ > > The settings I have for the record element are: > > File Type : wav > > Path: /CVP/en-us/app/"AppName" > > Filename: blank (to use auto created one) > > ÿ > > All other fields are default.ÿ I havent used the Record element > > before so I may be missing something obvious.ÿ Any feedback would be > > greatly appreciated. > > -- > > To respond to this post, please click the following link: > > > > > <http://developer.cisco.com/web/cvp/forums/-/message_boards/message/2155529> > > > > or simply reply to this email. > -- > To respond to this post, please click the following link: > > <http://developer.cisco.com/web/cvp/forums/-/message_boards/message/2157948> > > or simply reply to this email.
Subject: RE: Record Element gets "badfetch" Replied by: CLARENCE PARKER on 03-05-2010 12:28:41 PM that worked. I changed the VRU dialpeer to hard set the voice codec, and it work great now. Thank you, Clarence
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
