Created by: Chris Bomba on 17-02-2010 06:34:45 PM I recorded a new recording for en_welcome.au. I then upload that to the flash of my router and do a "call app voice load autoatt" and also "call lang voice load autoatt". When I call into the application I still get the old recording for en_welcome.au. How do you reload that prompt?
Subject: RE: Reloading audio prompts? Replied by: Yawming Chen on 17-02-2010 06:48:30 PM If it is configurable in application, like in BACD you can go to that application do : param welcome-prompt xxxx.au If hardcoded in the script then you may want to reload the application
Subject: RE: Reloading audio prompts? Replied by: Aleksey Alekseev on 24-05-2010 04:09:21 PM to reload the file KDAR-VGW#audio-prompt load ? WORD audio-prompt load name
Subject: RE: Reloading audio prompts? Replied by: Yawming Chen on 24-05-2010 05:20:19 PM If you configure it form IOS do something like no param welcome-prompt xxxx.au and param welcome-prompt xxxx.au from service will do it
Subject: RE: Reloading audio prompts? Replied by: paolo bevilacqua on 10-06-2010 01:20:13 AM If you configure it form IOS
do something like no param welcome-prompt xxxx.au and param welcome-prompt xxxx.au
from service will do it
Incorrect, audio prompts must be reloaded as indicated by another poster above. Otherwise router will reuse cached prompts, no matter how may times you reconfigure the script.
cvp_gwxfer.tcl. when execute line "leg vxmldialog vxml_leg" ,the log shows that Invalid Leg ID, but from log, the vxml_leg id is 30, I don't know why the system shows invalid leg idcode :puts "\n **********************GetTransfer_Number*...
Hello we are in the process of testing the latest Webex desktop app. We use a app called Software Center (Microsoft. Part of SCCM (System Center Configuration Manager)) to use the Webex uninstaller tool and push the latest versions. When ...
Currently looking at the UCCE REST User API and hoping to find a way to sign out users externally (i.e., not as the user)./finesse/api/User/xxxx with a payload of <User><State>... works fine, but the authentication section must be either the u...
version: CCX 12.0 ES 12Issue: Email & Chat was greyed out in IE and not even visible in Firefox (and neither was the logout button) I found clearing the cache from Firefox fixed this issue. Browser: Chrome - All OK. Browser: Cisco ...
I'm looking to use Finesse to set a call variable via API call (the intention here is to pass information from an outside system in alongside a call transfer) for PCCE 11.0.X. I currently have a sandbox environment going on DevNet and am hitting it from P...