Created by: saad alam on 16-06-2010 01:32:03 PM Hi,
Can we attach 3 or 4 display devices with 6000mxp to view each site on separate display device? if yes do virtual monitor provide this functionality.
Subject: RE: Tandberg 6000 Virtual Monitor Replied by: Roger Boe on 16-06-2010 03:06:26 PM Hi Saad,
Yes, this is possible using the virtual monitor. However please note the following limitations:
1) Two of the monitors will have to be connected on composite or S-Video output. The other two must be connected to the DVI outputs. 2) This will only work for the codec 6000MXP hosting the conference.
Best regards Roger
Subject: RE: Tandberg 6000 Virtual Monitor Replied by: saad alam on 16-06-2010 03:54:22 PM Thanks Roger for your Quick reply.
VIDEO OUTPUTS (6 OUTPUTS) 1 x MiniDin, S-video: main monitor 1 x MiniDin, S-video: dual monitor 1 x RCA / Phono, composite: main monitor or VCR 1 x RCA / Phono, composite: dual monitor or VCR 2 x DVI/XGA: main and dual monito
How many maximum sites i can get on separate Screens?6000 can dial 5+1 site so can i put 6 LCD to view (5 far sites and 1 self-view)
if i want to have one video output port to work in continuous presence mode..mean 1 screen showing all connected site and remaining port showing each site ..can we do that?
Hi Team, i am developing the call studio application as per requirement, i am struggling with one scenario..the scenario is while customer press 1 for email option then we need to send a mail accordingly , how we can achieve this? could you please te...
Hi, we have a service that is using the eventbroker SDK and that works as an IM and Presence third-Party compliance server. Unfortunately we found a problem with the sdk in which the cisco provided library is blocking its port under certain circumsta...
The Chrome extension for jabber SDK 11.8.3 or higher version listed in the docs is not availablehttps://developer.cisco.com/docs/jabber-web/#!downloads-and-documents/google-chrome-extensionhttps://chrome.google.com/webstore/detail/cisco-web-comm...
using updateRouteList request to add the Route Group member does not workTrying to add the Route Group/Local Route Group using updateRouteList request. Does not produce any errors but does not add the members to Route List. Anyone having same problem?&nbs...