cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

Updating Mobile Phone Notification Device

35
Views
0
Helpful
0
Comments

Subject: RE: New Message from Chris Bomba in Cisco Unity Connection Provisioning Int
Replied by: PATRICK NOWICKI on 30-11-2010 05:51:49 PM
Chris,
I see in the 7.1.3-CUPI-WADL.xml file that the url that you are referencing for smtpdevices is listed. I also see phonedevices, smsdevices and pagerdevices. I am assuming that what you are looking for is phonedevices.

Hope that helps!
-Patrick

From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com]
Sent: Tuesday, November 30, 2010 12:39 PM
To: cdicuser@developer.cisco.com
Subject: New Message from Chris Bomba in Cisco Unity Connection Provisioning Interface (CUPI) - CUPI Questions: Updating Mobile Phone Notification Device

Chris Bomba has created a new message in the forum "CUPI Questions":
--------------------------------------------------------------
With this string we can get the SMTP notification device information for a specific user.

vmrest/users/cc526ecd-6dde-43a1-90fb-bc9f743c0059/notificationdevices/474ba2f9-cebe-4cfe-935a-bb103dac699d

When updating the SMTP notification device we have to add the "smtpdevices" string into the URI like so:

vmrest/users/<SubscriberObjectId>/notificationdevices/smtpdevices/<ObjectId>

We could not find any documentation on this but were lucky the question was asked and answered.  We are now trying to update the Mobile Phone setting and we are running into the same issue.

What string do we need to add after the "notificationdevices" string to update the Mobile Phone parameter?

If this is documented somewhere can you please point us to the document.

Thank you very much.

--
To respond to this post, please click the following link:
<http://developer.cisco.com/web/cupi/forums/-/message_boards/message/2787188>
or simply reply to this email.
This document was generated from CDN thread

Created by: Chris Bomba on 30-11-2010 05:38:59 PM
With this string we can get the SMTP notification device information for a specific user.
 
vmrest/users/cc526ecd-6dde-43a1-90fb-bc9f743c0059/notificationdevices/474ba2f9-cebe-4cfe-935a-bb103dac699d
 
When updating the SMTP notification device we have to add the "smtpdevices" string into the URI like so:
 
vmrest/users/<SubscriberObjectId>/notificationdevices/smtpdevices/<ObjectId>
 
We could not find any documentation on this but were lucky the question was asked and answered.  We are now trying to update the Mobile Phone setting and we are running into the same issue. 
 
What string do we need to add after the "notificationdevices" string to update the Mobile Phone parameter?
 
If this is documented somewhere can you please point us to the document.
 
Thank you very much.
 
CreatePlease to create content
Content for Community-Ad
FusionCharts will render here