cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Visca Control of 1080p 12x Zoom Camera

160
Views
0
Helpful
0
Comments
This document was generated from CDN thread

Created by: Chris Audette on 09-02-2010 04:36:12 AM
Gentlemen,

Hope all is well in Oslo!

I have a consultant that would like to specify 12 cameras with a visca controller.

1) Should I have any concerns about controlling these with a Sony joystick?

2) Are you aware of any limitations with the amount of cameras on a visca chain?

3). Are the cameras velocity sensitive?  Will the cameras move faster holding the joystick longer?

Thanks!

Chris

Subject: RE: Visca Control of 1080p 12x Zoom Camera
Replied by: Roger Boe on 16-02-2010 10:00:01 AM
Hi Chris,

1)  We do support the Visca protocol, so in theory this should work just fine. However we have not tested it with such a Sony joystick so it should be tested and verified.

2) The Visca protocol is limited to 7 cameras and this is what we support.

3) We do support speed as a parameter when controlling the camera. It doesn't do this automatically, so you would have to specify a command to tell it what speed to use when moving the camera.

Best regards
Roger