This document was generated from CDN thread
Created by: DUY DAO on 24-11-2010 03:22:24 AM
Hi all. Hope you guys can help
Here is my setup:
1. The C40 is setup with Dual-screen presentation only. The HDMI videoout is going to one monitor and the DVIout is going to a second monitor for Presentation only.
2. The second monitor, NEC P521, also has another input from the local room PC.
My Problem:
The NEC P521 has a build-in automatic video input switcher that can switch between my local PC input and the C40 Presentation input when a LIVE source is detected. However, the C40 DVIoutput is always ACTIVE regardless if present from the local codec or not. Which gives me two LIVE souces, local pc and C40 Presentation, hence, defeat the monitor auto input switch fuction.
My question:
Is there anyway I can make the C40 video OUTPUT2(DVI) only to be live when in PRESENTATION MODE?
Thanks in advance
Subject: RE: C40 - Video output 2 ALWAYS active
Replied by: David Bruun-Lie on 29-11-2010 01:42:28 PM
Hi Duy,
unfortunately this is not currently possible.
Regards,
David
