cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
677
Views
2
Helpful
3
Comments
cdnadmin
Level 11
Level 11
This document was generated from CDN thread

Created by: prince christopher joseph on 09-12-2011 10:53:15 AM
Hi ,
 
I request your help in answering following questions
 
1) Does  Cisco IOS VoiceXML browser is fully complaint with vxml2.1 (w3c Standards)
 
2) Does cisco cvp vxml server supports the hosting pure vxml application which can be invoked by Cisco Gateway or Cisco ICM script through http request ? or it is mandatory to have a call studio application which in turn invokes the vxml application ?
 
Thanks for your help.
 
Regards,
Prince Christopher
 

Subject: RE: New Message from prince christopher joseph in Customer Voice Portal (CV
Replied by: Hemal Mehta on 13-12-2011 08:45:14 AM
Yes, there is a version compliant with voicexml 2.1.  You can get more details here:
http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6554/ps6599/ps7188/product_data_sheet0900aecd8058208c.html
http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6554/ps6599/ps7188/product_data_sheet0900aecd8058208c.pdf


You should be able to invoke a pure vxml app through ICM script.   It is recommended to use Studio, but not mandatory.
Hemal

From: Cisco Developer Community Forums [mailto:cdicuser@developer.cisco.com]
Sent: Friday, December 09, 2011 9:53 AM
To: cdicuser@developer.cisco.com
Subject: New Message from prince christopher joseph in Customer Voice Portal (CVP) - General Discussion - All Versions: Does Cisco IOS VoiceXML browser supports vxml 2.1 version

prince christopher joseph has created a new message in the forum "General Discussion - All Versions":

--------------------------------------------------------------
Hi ,

I request your help in answering following questions

1) Does  Cisco IOS VoiceXML browser is fully complaint with vxml2.1 (w3c Standards)

2) Does cisco cvp vxml server supports the hosting pure vxml application which can be invoked by Cisco Gateway or Cisco ICM script through http request ? or it is mandatory to have a call studio application which in turn invokes the vxml application ?

Thanks for your help.

Regards,
Prince Christopher

--
To respond to this post, please click the following link:

<http://developer.cisco.com/web/cvp/forums/-/message_boards/view_message/4872786>

or simply reply to this email.
Comments
willwatts
Level 5
Level 5

VoiceXML 2.0 is enabled via the command: vxml version 2.0.   How does one enable VoiceXML 2.1 on a gateway?

Gerry O'Rourke
Spotlight
Spotlight

the command vxml version 2.0 is used in the IOS configuration (see chapter 11)

This command enables full VoiceXML 2.0 compliance and the VoiceXML 2.1 features in Cisco IOS 12.4(15).

I hope that answers your query.

See this link for reference:

Cisco IOS VoiceXML Quick Start Guide - Cisco

Gerry

willwatts
Level 5
Level 5

Thank you that helps.  I had to issue command vxml version 2.0 in order to get the Record Element beep to work.  I didn't understand what VXML compliance the GW was at before I issued that command.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Quick Links