cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2486
Views
0
Helpful
5
Comments
Geovani
Cisco Employee
Cisco Employee
  1. Login to http://IP_ADDRESS_PHONE/admin/advanced
  2. Navigate to Voice --> Provisioning --> CA Settings
  3. Input the Custom CA Rule, pointing to the certificate (in the example below, we are pointing to EDOS
    1.png

You can also configure a Custom CA Rule via the xml file by using the below parameter as an example:

<Custom_CA_Rule ua="na">https://webapps.cisco.com/software/edos/callhome/rootca?id=xxx</Custom_CA_Rule>

Comments
AlpBakir0524
Level 1
Level 1

Hello

 

How can I access to http://IP_ADDRESS_PHONE/admin/advanced ?

 

It says for me, 

This site can’t be reached

Geovani
Cisco Employee
Cisco Employee

Hi there, 

Try https see if makes any difference. 

If http or https does not work, then web access might have been disabled. 

Dan Lukes
VIP Alumni
VIP Alumni
jdarbonnel
Level 1
Level 1

Hi,

 

Is this link still works ? i'm facing to certificat error on 88XX-3PCC device after a factory reset.

The Phone does not download the Root CA from this link.

 

Thanks

Geovani
Cisco Employee
Cisco Employee

Hi, 

the link above is an example only. You can download the client certificate bundle from CDA https://software.cisco.com/software/cda/home, or you can also upload your own custom certificate to CDA and get your own link to configure the phones with (you'd get a link similar to the one shared on the above post)

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: