This issue is documented in Cisco bug ID CSCin53117. It appears that in Cisco routers 26xx (2650/2620/2691) and 3640 routers, voice interface cards option AIM-VOICE-30 is missing.
Users find AIM_VOICE_30 missing in slot 0 for an existing gateway. When you go to the gateway configuration page, these slots show as not configured. Once the user presses update, the previously configured end points for slot 0 are deleted. Users need to select AIM_VOICE_30_SLOT_0 as the module, and re-configure all end points under slot 0.
The above issue can solved with an upgrade to Cisco CallManager 3.3(3) SR2, which is available on CCO. The Upgrading to Cisco CallManager 3.3(3) documentation assists you with how to upgrade the Cisco CallManager.
We have UCCX call back feature which works internally without any issues. When PSTN calls made name recording not heard by agent which causes agent not to identify the customers. I would like to check where this recordings has saved or any issue while exe...
We recently had a WebEX Room Kit Pro with a QuadCam installed. Our setup uses a stage rather than a conference table. Currently when the QuadCam tracking is turned on it operates with a closeup snap to the speaker after they have moved positions. &nb...
Hi Guys,Hey... I want to install CUCM 11.5 with the OVA "cucm_11.5_vmv8_v1.1.ova" VMWare recommends to have 11.5 with VMWare version 9. I was thinking into grab the ova file form Cisco and Change it by myself line this.Here are my questions,. I...
When is Windows 2019 going to be added to the matrix in the link below? And is it support now and just waiting for the matrix to be updated. https://developer.cisco.com/site/tapi/documents/supported-windows-os/