After Cisco Unity is upgraded from 4.0(5) to 4.2(1) and a called number is forwarded, Unity plays th...
After Cisco Unity is upgraded from 4.0(5) to 4.2(1) and a called number is forwarded, Unity plays the opening greeting instead of the personal greeting of the called number. DbWalker does not report any errors.
When Cisco Unity is upgraded, rebuilt, or restored using the Cisco Unity Connection Disaster Recovery Tool (DiRT) utility and the called Directory Number (DN) is forwarded (through a No Answer, or Forward All), this issue occurs. In this case, Cisco Unity plays the opening greeting instead of the personal greeting of the called subscriber. There are no errors shown on the Cisco Unity Directory Walker (DbWalker) utility.
In order to resolve this issue, perform these steps:
Verify the system prompt settings on the Cisco Unity server, under \Commserver\Localize\Prompts\ENU\.
Once verified, change the value of the prompts accordingly from the registry under HKLM\Software\Active Voice\SystemParameters\1.0\, where the DWORD value PromptSet=G 7xx (29 or 11).
Hello, CUIC server taking a long time to finish the upgrade process, around 5 hours. I performed the switch version 5 hours ago and nothing yet. We believe it is normal behavior, right? How can I validate that please?  ...
I have this scenario with a customer and I'm not sure how to apply it.
Is it possible to make the 2 FXO lines on Site A only accessible for users on Site B?
Meaning users on Site A cannot use these 2 FXO lines.
Hi AllQuestion: Is there any way to find the MAC address of a PC which connected to Cisco ip phone directly from IP phone?(its web or ssh)my ip phone model here: CP-7821Note: I know that we can find it from Cisco switch using command “ show...
Hi teams, i have a case for ATA 191. This ATA is new. i just enable web access for this ATA, and never make new password. Default password should be admin/admin, cisco/cisco. but does not work.
Firmware ATA: ATA191.12-0-1-0405-005and then i tr...