The following is an example of how to setup call blocking based off of incoming Caller's ANI.
In this example, my voice enviornment consist of an 8.6 CUCM Pub with 3 Subscribers. I have three cisco 2911 h.323 voice gateways with 1 PRI each. I put together this simple 3 step process based off of a Cisco Configuration guide. I tested it on my cell phone and a coupe of others and it worked great. Here are the three steps:
Block Incoming Calls based off of ANI.
The following configuration must be applied to each voice gateway. It is done in basically 3 steps:
1. Create a Translation Rule.
Within the translation rule you will use the reject command followed by the pattern you wish to reject. In this case we use the entire phone number.
Hello everyone! I'm curious what other people are doing for MOH for multiple locations. Scenario is a need for 45 sites to have unique MOH playing that is specific to the location and allow them to manage their own MOH files to change them week...
Currently running CUCM 10.x with Jabber 11.x.We also have hosted WebEx.Therefore Directory services are handled by WebEx.Looking to find a way to have directory services handled by CUCM.Is this possible?Are we able to use a specific configuration file for...
Hi,Some users are able to sign in to Jabber from their mobile device while not connected to company network. I am not. I get error 'Your username or password is not correct"; however, I am able to login to Jabber while on a company PC using sa...
A few users need to administrate webex meetings on shared calendars from Mac computers using outlook in the office 365 cloud. Now it is breaking with Office version 2019 unless the "authorize webex with a tenant administrator account ..." box is chec...