The Shared Multiparty (SMP) Licensing offered with TelePresence endpoints supports Multiparty conferencing using TelePresence infrastructure components on customers premises. The customer acknowledges by purchasing SMP license that they have already or plan to deploy the necessary hardware to support Multiparty Conferencing.
Each SMP license allows for one concurrent meeting with unlimited participants, deployed using Cisco Meeting Server or Cisco Telepresence Server. The SMP license also includes 1 Expressway Rich Media Sessions (RMS), and the CUCM/Expressway TP Room License. A single RMS licenses now only needed on Expressway-E with version X8.8 and higher.
For Multiparty conferencing using the SMP License requires one of these options deployed;
Cisco Meeting Server(s) with an activation key (R-CMS-K9, included with CMS1000 bundle)
Cisco TelePresence Server without screen licenses, Cisco Telepresence Conductor, and Cisco TelePresence Management Suite (TMS) with Provisioning Engine (TMS-PE).
New customers without CUWL Pro or Meetings, should look at the SMP Starter Kit to get initial package licenses.
Existing customers can just add additional SMP License to their Meeting Server or Conductor.
Can anyone point me in the right direction for the required cable to connect a Quad Cam Line in to a SX80 line out.The install guide picture makes it look like its a fully balanced stereo out to the quad cam, but i can't say I have ever seen a stereo bala...
I have an overhead paging system connected to a VG310 using SCCP. For the most part it works fine however there is one issue we have found. If I call the paging number and hang up the phone while it is still ringing (before the paging system p...
I am looking to see if CUCM Intercom function can be configured as a two way call, in other words, with the called end not muted and also to see if the Intercom answer tone can be disabled. This question was asked in conjunction with a security group that...
I'm on a CUIC bundled with CCX 188.8.131.5200-24. When I run the "custom call variable report" I see duplicate values in the report. Here is an example of the problem in action: As you can notice, some rows are duplicated more times. To be more clear, ...