This may happen when connected to certain ISDN networks. When Cisco CallManager is the user side of the PRI, it may send a Progress Indicator IE in the ALERTING message sent, which is invalid in some PRI protocols.
In the situation where Cisco CallManager immediately connects the call to Cisco Unity, the Alerting Progress Indicator may come after the CONNECT message is sent. This causes a protocol violation, and Cisco CallManager disconnects the call.
This issue is tracked by Cisco bug IDCSCdy26520.It is fixed in Cisco CallManager 4.0.
To resolve this issue, set the Disable Alerting Progress Indicator service parameter to True in the Cisco CallManager. This can be done by logging into the Cisco CallManager Admin page and performing these steps:
Go to Service > Service Parameters. Select CallManager.
Scroll down to Disable Alerting Progress Indicator. Set this parameter to True. ClickUpdate.
Hello,In our jabber configuration file, we have 3 directory sources entries(BDI,EDI & UDS).We have a web server that hosts all the contact photos.When we login via MRA, the contact photos are visible and it works as expected.When we login to jabber wh...
Hi guys trying to configure Saml SSO with ADFS 4 ( winServer 2016) on CUCM 12.5used the Link below in the configuration process :https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications-manager-callmanager/211302-Confi...
Hi @Wayne DeNardi First of all, We really care about your products and your products is very goodHow do I connect to control Cisco Room kit plus Codec via Rs232 with Extron Processor as the Diagram bellow. Can you show details from connect ...
We have Cisco Prime Collaboration Assurance Version: 11.6.All the CUCM Nodes are manageable and Accessible from PCA Inventory.However SIP Trunks from CUCM to Cube/Voice Gateway Routers, Unity Connection are showing "No Service" in PCA. But from the Cisco ...
We upgrade our CUCM and CMS cluster :CUCM 11.5 -> CUCM 12.5CMS 2.7 -> CMS 2.9.5 Today we find a problem between our Cisco codec and our CMS cluster. When we make a call from a Cisco Codec (DX80, Room Kit, MX700) to a CMS meeting, the...