cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Cisco 7962 Phone with 2 7915 add on modules not working when trying to set 54 buttons

292
Views
5
Helpful
0
Comments

Cisco 7962 with 2 7915 add on modules

In order to get those 7962 phones with 2 7915 modules and 54 buttons lines please follow the steps below:

Steps

1.Navigate to Device -- > Device Settings -- > Phone button template.

2.Select standard 7962 template.

3.Copy this template and rename it to create a template with 54 buttons.

Fully tested on CUCM version:

System version: 11.0.1.20000-2

System version:10.5.2.10000-5

System version: 9.1.1.20000-5

System version: 8.6.2.23900-10

Cisco Unified IP Phone Expansion Module 7916

Link: http://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/unified-ip-phone-expansion-module-7916/data_sheet_c78-468673.html

 I hope this can help someone.

Regards,

Gerson Fabian Morales Marin (gersomor)