cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2999
Views
0
Helpful
3
Comments
vince.castro
Level 1
Level 1
Fun lab with Packet Tracer and running Cisco CME with 3 ip phones, 3 laptops, 1 switch, and 1 router.  Fun lab with repetition.  You will be able to test your phones and laptop for connectivity etc.

 

Solution;

see attached CME Packet Tracer Lab....

Attached are;

> Packet Tracer PKT file that sets you up with the hardware only.

> Lab exercise text.

 

 

Comments
vince.castro
Level 1
Level 1

Additional sites for Packet Tracer training and tutorials..

https://www.packettracernetwork.com/

 

Youtube for Ron Wellman's video;

https://www.youtube.com/watch?v=heIi9ok4HeI

 

 

Rutt
Level 1
Level 1

Old thread but you need to edit the config for ip dhcp pool VOICE: (you mixed the Lo0 ip address with the voice ip range)

> network 10.0.0.0 /24 
> default-router 10.0.0.1
> option 150 ip 10.0.10.1
> ip dhcp exclu 10.0.0.1 10.0.0.9

 

Should be:

> network 172.16.0.0 /24
> default-router 172.16.0.1
> option 150 ip 10.0.10.1
> ip dhcp exclu 172.16.0.1 172.16.0.9

 

vince.castro
Level 1
Level 1

Thanks for the feedback, and yes for this lab the loopback address works and really the focus is on a basic Packet Tracer CME setup.  In real life situations the loopback would be in a different subnet.  thx again

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: