From Cisco Unity Express prompts, the connection to backup server is established and the backup server can response to ping, but the backup progress remains at 0 bytes. History.log shows this output:
Category: Configuration Backup Server: ftp://x.x.x.x/backup/ Operation: Backup Backupid: 2 Date: Result: Failure Reason: Connection to backup server failed: ftp://x.x.x.x/backup/ : returnvalue:6 Unable to connect to backup server.
It is observed that if the FTP password contains a special character, it does not allow the backup. In order to resolve this issue, remove the special character from the FTP password. Also make sure that there are no routing problems in the network that can affect the FTP backup on Cisco Unity Express.
Good morning and a very happy Friday Cisco community. Have a weird one here, doing an upgrade for the client UC system(CUCM, CUC, CER and IM&P) from 10.5.1 TO 12.5. But I had to upgrade the CUCM to 10.5.1 to 10.5.2 first so It can be upgra...
I have just purchased a new 'Cisco 561 wireless single headset, Standard Base Station EU' and I cannot pair the headset to the base station. I have followed the instructions to power off the headset and then place in the base station but that does not wor...
Could you please someone explain me what is the difference showing on CUCM device page with regards ip_phone
LSC status =NONE
LSC status =Upgrade Success?
Some of my ip phones has status Upgrade Success and some others status= NONE.
Both i can confirm...
I am getting the following error while trying (unsuccessfully) to use the Zoom Enhanced API connector to synchronize mute state on endpoint and zoom meeting. HTTP Feedback Connectivity ProblemsThe HTTP Feedback for slot 4 can not...
Hi there I got a used dx80, when I reset the system and try to connect to the wifi. it keep saying the wifi is saved, secured with WPA2 but it is just not connecting it. And I cannot use any app and it shows I have problem with the internet connectio...