How does the phone registered in CUCM environment?
-The phone will obtains power via PoE or AC adapter. -The phone will loads its locally stored firmware image. -The phone learns the voice vlan id via cdp from the switch. -Via DHCP it learns it IP address, subnet mask, default gateway and TFTP server. -Phone contacts TFTP server and request its config file names SEP .cnf .xml created by CUCM and uploaded to TFTP when administrator creates or modifies the phone.
Hello Team,Please need help for Access-Backbone scenario.I have an issue to register my SIP Phone on Cisco CUCM via SBC.My design: SIP PHONE <---------> SBC <----------> CUCMSIP phone can register when it directly connected to CUCM. But ...
We have CCX 11.5. There is a requirement that no call should wait on the queue and if all the agents are engaged with calls the new call should be disconnected immediately. Also Agents should be alerted with caller ID or should be provided with a mechanis...
Have UCCX 10.6 loaded and finesse works fine on IE 11 and microsoft edge and works with Firefox but when using chrome when you click on team data or que data nothing loads stays stuck on loading report. Is this a version issue with chrome.