cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3342
Views
0
Helpful
0
Comments
Amit Sharma
Cisco Employee
Cisco Employee

CME CONFIGURATION (With DHCP):

Platform: Cisco 2851

IOS:  c2800nm-ipvoice_ivs-mz.151-2.T1.bin

Phone Firmware: 9-0-3

Phones: 7945/7965/7961

Enabling IPv6:

ipv6 unicast-routing

DHCP CONFIGURATION:

ipv6 dhcp pool NEW

address prefix FEC0:0:0:1::/64

link-address FE80::/10

link-address FE80::1AEF:63FF:FE62:BA00/10

Interface Configuration:

interface GigabitEthernet0/0

ipv6 address FEC0:0:0:1::/64 eui-64

ipv6 enable

ipv6 dhcp server NEW

CME configuration:

telephony-service

protocol mode ipv6

ip source-address FEC0::1:1AEF:63FF:FE62:BA00 port 2000

*********************************************************************************************************************************

Switch Configuration:

IOS: c3750-ipbasek9-mz.122-55.SE.bin

Platform:  cisco WS-C3750G-48PS

Enabling IPv6:

ipv6 unicast-routing

Vlan Configuration:

interface Vlan10

ipv6 address FEC0:0:0:1::/64 eui-64

ipv6 nd autoconfig prefix

ipv6 nd prefix FEC0:0:0:1::/64

Swicth-Port configuration:
interface GigabitEthernet1/0/9
switchport access vlan 10
switchport mode access
More to follow
Advises welcomed

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: