cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

AMA-CUCM Troubleshooting: Best Practices for Reading Trace Files

Compatibility and interoperability

730
Views
0
Helpful
6
Comments
Beginner

Hi

Please let me know if we can install Cucm8.6 on below said HW.

1) HP Proliant DL360G5

         2 Processors - Dual Core Intel Xeon 5130

         4GB RAM

         3 x 72GB SAS 10K drives

      2) HP Proliant DL580G5

         2 Processors - Quad Core Intel Xeon E7340

         12GB RAM

         6 x 146GB SAS 10K drives

6 Comments
Engager
Beginner

hi

this does not say anything about

1) HP Proliant DL360G5

         2 Processors - Dual Core Intel Xeon 5130

         4GB RAM

         3 x 72GB SAS 10K drives

      2) HP Proliant DL580G5

         2 Processors - Quad Core Intel Xeon E7340

         12GB RAM

         6 x 146GB SAS 10K drives

But as per  Cucm 8.6  min Ram and HDD required is available , in 2nd option. will this work fine

VIP Advisor

You need to check here for HP configurations assuming Non virtualized.

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/product_solution_overview09186a0080107d79.html

If it is virtualized then follow the spec based model here

http://docwiki.cisco.com/wiki/Specification-Based_Hardware_Support

Srini

Beginner

thanks Srinivasan,

neither of them are in the list .

Any way DL580  has  RAM and HDD to support the CM 8.6.

I have written to the BU ,

Any way thanks.

VIP Advisor

Its not a question of whether you have enough RAM or HDD. If it is not on the list is NOT supported period in Non virtualized Mode

Srini

Beginner

I think if it not in the list then , this HW has not been test for what so ever reason.

let us  see the response from BU,

Any way this is not a virtualised env..  I had few exp.. during migration .. few for unlisted hw had supported and only the enablement of TAC needed some approvals.

anyway thanks

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards