Navigate to the Cisco Dual Mode device page for the user.
In the Product Specific Configuration Layout section, enter the iPhone country code. This information helps determine the Caller ID.
Enter LDAP User Authentication settings:
If credentials are not needed to access directory services, select Disabled.
If users must enter credentials to access directory services, select Enabled.
Enter LDAP username and password:
Enter credentials for a single read-only account that all users use to access Active Directory. These credentials are sent in clear text in the TFTP file. Users need not enter credentials into Cisco Jabber.
Enter a username with access to the directory and leave the password blank. You must give the password to each user and tell users to enter the password into the settings in Cisco Jabber.
If authentication is not required, leave these settings blank.
By default, the LDAP username is the userPrincipalName (UPN) and may be in the form of an email address (email@example.com).
Enter LDAP server address.
Enter the hostname or IP address and port number for your Active Directory server.
When using the Global Catalog, use port 3269 for secure SSL connections or 3268 for nonsecure connections.
When using other LDAP servers, use port 636 for secure SSL connections or 389 for nonsecure connections.
Use the format YourDirectoryServer.YourCompany.com:portnumber. By default, if you enter no port or SSL settings, Cisco Jabber attempts an SSL connection to port 3269. For example, directoryserver.cisco.com:3268.
Enter the LDAP Search Base using the format: CN=users,DC=corp,DC=yourcompany,DC=com. By default, this application uses the search base that is found in a RootDSE search on the defaultNamingContext attribute. If you need to specify a different search base, enter the Distinguished Name of the root node in your corporate directory that contains user information. Use the lowest node that includes the necessary names. Using a higher node creates a larger search base and thus reduce performance if the directory is very large.
To help determine the optimal search base, you can use a utility such as Active Directory Explorer (available from Microsoft) to view your data structure.
Enter the LDAP field mappings. LDAP field mappings identify the attributes in your directory that hold the information to be searched and displayed for directory searches.
Note: See the section on LDAP Field Mapping below for more information.
Enter the LDAP photo location, if side loading photo URL.
On the mobile device, restart Cisco Jabber.
If you allowed end-user configuration editing, delete the Directory account on the client and then set up the account again.
Step through the wizard until you see the option to enable or confirm the corporate directory account settings.
At the option to enable or confirm the corporate directory account settings, tap Yes.
Enter the password, if it is not already entered.
Select Save, even if you make no changes.
Complete the wizard.
LDAP Field Mapping:
Cisco Jabber for iPhone determines which type of directory server you use by checking whether the defaultNamingContext is defined. If the defaultNamingContext is defined, the app determines that you are using Active Directory. If this value is not defined, the app determines that the system is using another LDAP server.
The table below shows default attributes for Active Directory, other LDAP servers, and Cisco Jabber for iPhone.
Element (Human Readable)
Jabber Element Name
Default Active Directory Attribute
Default Attribute for All Other LDAP Servers
Your Value, if Different
Main phone number
Home phone number
Second home phone number
Mobile phone number
Second mobile phone number
Direct to voicemail phone number
Other phone number
Cisco Jabber will display and search the values of the Default Active Directory Attributes when using Microsoft AD. For example, if the user's name is John Smith,
Jabber Element Name
Value of AD Attribute
Main Phone Number
If your directory server uses a different attribute than the default values, you must map the Jabber Element Name to the Attribute in your directory. The syntax for mapping is JabberElementName=YourAttribute. For example, if your directory uses the ipPhone attribute as the main phone number, you can map the attribute as mainPhoneNumber=ipPhone. Multiple field mappings can be separted mainPhoneNumber=ipPhone;displayName=nickname .
Jabber will attempt to contruct a reporting structure information for the directory search. The manager ID and employee number entries are required for reporting structure information in directory search results. The default mappings are as follows:
Active Directory: manageruid=manager; employeeNumber=employeeID.
Open LDAP: servers are manageruid=manager; employeeNumber=employeeNumber.
If a manager has more than 25 direct reports, Cisco Jabber for iPhone displays only the first 25 reports. The value of a person's manageruid should be the value of the manager's employeeNumber.
Directory photos can come from LDAP or side loaded.
The default mapping is photo=jpegPhoto. No additional action is necessary if you do not require a custom mapping. If you require a custom mapping, you can modify the LDAP Field Mappings.
If you want to side load directory photos, populate the LDAP Photo Location, in the CUCM Device Configuration Page, with the URL of photo location. We recommend that you use the variable %%LDAP Attribute%% to represent the LDAP attribute.
Hello,I have a queue on Webex Calling and I have inserted a custom message for music on hold. When I cann the queue from my phone, the music is not played and so i still hear the classic tone that usually we hear when we call someone. Why is it not workin...
Hello,today something strange happened, I registered a phone on a Customer's Webex Calling organization, at one point the phone dsappeared and then I tried to adding it another time. Now, when I click on "Add device", I can selct "existing user", select m...
HaiI want to upgrade UC infra by buying smartnet, please guide what licence and smartnet need to orderhere is old BOQR-CBE6K-K9Cisco Business Edition 6000-Electronic SW Delivery-Top LevelBE6K-SW-10.XBusiness Edition 6000 v10 export restricted softwa...
Hi,I have a CUBE that is sending an INVITE to a proxy, and in some cases the proxy just sends the call back the CUBE.This causes the following error:*Nov 29 22:20:37.652: %CALL_CONTROL-6-CALL_LOOP: The incoming call has a global identifier already present...
All,I've tried using Packet Tracer 7.2.2 and 8.0.1 to try and make VoIP calls with 7960 IP Phones between two networks. I have two 2811 routers, two 2950 switches which connect to two 7960 (1000 and 1001 network 1 and 2000 and 2002 network 2) on each netw...