This document covers the procedure to Configure the Custom media files for Music On Hold feature in Cisco Unified Communications Manager (CUCM).
To add a custom Music On Hold audio source, the source file must be in PCM/WAV format. This feature is tested on Cisco Unified Communications Manager 8.5
Uploading a Music On Hold Audio File:
Perform the following procedure to upload a music on hold audio file. Uploading the audio file makes it available for use as a music on hold audio source. If you use the Media Resources > Music On Hold Audio Source menu option to add a new audio source, the addition makes the newly uploaded audio file available in the MOH Audio Source File drop-down list box.
Adding new Music On Hold audio source,
1. Add a new Music On Hold Audio Source (Media Resources | Music On Hold Audio Source).
2. Click on the Upload File button:
3. Choose one of the following options:
•If you know the path to a file that specifies an audio file, enter the path in the File field.
•If you do not know the path and file name, search for the audio file by clicking the Browse... button to the right of the File field. After you find the audio file, click the desired audio file and click Open. The path to the chosen audio file displays in the File field of the Upload File popup window.
4. To upload the specified audio file, click Upload.
5. After the file is uploaded, it will be available under the MOH Audio Stream Source File list.
Note Uploading a file uploads the file to the Cisco Unified Communications Manager server and performs audio conversions to create codec-specific audio files for MOH. Depending on the size of the original file, processing may take several minutes to complete.
The newly uploaded audio file gets added to the list of audio files in the MOH Audio File Management window.
6. Select an available MOH Audio Stream Number.
7. Select the newly uploaded media file under MOH Audio Source File.
8. Depending on the media type, it may be appropriate to play the file continuously. If this is the case, check the box Play continuously.
9. If this media file is to be used with multicast streams check Allow Multi-casting.
10. Click on Save.
Music On Hold Audio Sources - Specifications
The recommended format for audio source files includes the following specifications:
•16-bit PCM wav file
•Stereo or mono
•Sample rates of 48 kHz, 32 kHz, 16 kHz, or 8 kHz
Creating Audio Sources
Most standard wav files serve as valid input audio source files, including the following file types:
•16-bit PCM (stereo/mono)
•8-bit CCITT a-law or mu-law (stereo/mono)
Note The Music On Hold feature does not support the MP3 format.
Hello.I have Cisco 7960G IP Phone that registered in CUCM 10.5.2 .I define some of directory numbers with urgent priority eg. 2248. when someone tries to dial a number like 22485631 in phones except 7960, if he first types the numbers in on-hook state and...
I have a VWIC2-2MFT-T1/E1 card in a 3825 router. After a power outage it is no longer connecting. When the router is powered back up both ports on the T1 card have the Alarm light on even without any cable plugged in. Is this a configura...
Hi All What are the explanation for SIP servers in Cisco terminology? If the all the server types are integrated on CUCM, what are feature or settings it would be? Proxy Server:Redirect Server: Registrar:Location Server:I have some understa...
We have just implemented UCCX 12.0 for staging and testing.Write after the installation we could not access the <IP Address>/appadmin page. followed the installation guide and it does not show any steps required after the fresh install. a...