Migration to Cisco Unified Communications Manager Release 10.0(1) using Prime Collaboration Deployment
is supported only for the Cisco Unified Communications Manager versions listed in the Introduction section.
Upgrading directly to Unified Communications Manager Release 10.0(1) from Releases 4.1(3), 4.2(3), 4.3(2),
5.1(2), 5.1(3), 6.0(1), 6.1(1), 6.1(2), 6.1(3), 7.0(1), 7.0(2) and 7.1(2) is not supported.
For these releases, you must upgrade to an intermediate release before you use the M1 migration procedure
to Migrate to Unified Communications Manager Release 10.0(1). Perform the migration by following the
below stages:
1 Upgrade to Unified Communications Manager Release 6.1(5) or 7.1(5) as an intermediate release.
2 Deploy Prime Collaboration Deployment on a virtual machine.
3 Prepare Prime Collaboration Deployment for Cisco Unified Communications Manager cluster migration
to Release 10.0(1).
4 Migrate current Unified Communications Manager to Release 10.0(1) using Prime Collaboration
Deployment.
This document is applicable to Unified Communications Manager clusters with the following environment:
• One of the following Unified Communications Manager releases is installed: Releases 4.1(3)-4.3(2),
Releases 5.1(2)-5.1(3), Releases 6.0(1)-7.1(5), or Releases 8.0(1)-9.1(2)
• Unified Communications Manager cluster is installed on Cisco Media Convergence Server (MCS) server.
• There are no changes required to the IP addresses or hostnames for your Unified Communications
Manager upgrade. If you do need to change IP addresses or hostnames, additional steps are needed that
are not covered in this document. For more information, refer to Changing the IP Address and Hostname
for Cisco Unified Communications Manager, Release 9.1(1).
• The migration to Unified Communications Manager Release 10.0(1) will be performed in your production
network.
