cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1320
Views
1
Helpful
2
Comments
guoqiang.li
Level 1
Level 1

Disconnect second line when Hold Call hang up

Hi,all:

I have the follow symptom:

A call is received and answered in a extension, a new call ingress in the same extension. The new call is answered, and the first call is put in hold.

The problem is that the hold call (first call) is hang up by first caller, in a period of  time determined,approximately 5 seconds, and  second call is disconnected automatically.

This only happens with internal calls and first call from the PSTN.

What happens? thks

my config:

!
ephone-dn  3  dual-line
number 116
pickup-group 9
label xxx_116
name xxx_116
hold-alert 30 originator
!

!
voice-port 0/1/0
supervisory disconnect dualtone mid-call
cptone CN
timeouts interdigit 5
timeouts call-disconnect 5
timeouts wait-release 5
caller-id enable
!

!
dial-peer voice 10 pots
translation-profile incoming ext_add_9
translation-profile outgoing telcom
service aa
destination-pattern 9.T
port 0/1/0
!

!
telephony-service
max-ephones 58
max-dn 192
ip source-address 10.64.183.2 port 2000
timeouts interdigit 5
timeouts ringing 45
timeouts transfer-recall 20
system message AON-COFCO-GZ PHONE
time-zone 42
time-format 24
max-conferences 12 gain -6
moh flash:music-on-hold.au
web admin system name admin password aon123
web admin customer name aon123 password aon123
dn-webedit
time-webedit
transfer-system blind
secondary-dialtone 9
directory entry 1 910000 name test
create cnf-files version-stamp 7960 Mar 04 2010 12:35:17
!

I tried change all the transfer-system options,try no timeouts transfer-recall,can't fix the problem.

Comments
rsaborio
Level 1
Level 1

This should be posted on Discussions, not Documents.

Greeshma Bernad
Cisco Employee
Cisco Employee

Thank you for    your posting and interest in the Cisco Support Community.  For best  practices on posting documents in this community, you can refer to

https://supportforums.cisco.com/docs/DOC-6022#Can_I_use_documents_to_post_technical_questions

For    technical questions related to a Cisco Product or Technology, we    encourage you to post on the Network Professionals Forum (NetPro). For    your specific issue, you can go to IP Telephony forum.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: