In Cisco Unified Communications Manager, often times werequire to upgrade or downgrade the firmware of a high number of IP Phones, onbusy systems where the TFTP server it is being used to provide firmware to theIP phones, sometimes will not be possible to just change the default firmwareload on your TFTP.
To solve this problem we can create an external TFTP serverwith the firmware we need and point the IP phones to use that server.
Here are the steps to configure the external TFTP using anopen source TFTP.
1.Installthe TFTP server.
2.Download the firmware files.
3.Configurethe TFTP server.
4.Configure the DHCP server.
5.Configure the XMLDefault.cnf.xml
6.Perform afactory reset or point the IP phones to the correct TFTP.
Hello, I am needing some assistance with Call Manager logs. I am running CM version 9.1.1.I need to determine if there are any logs that would show me a specific phone's call history. Please advise on the location of where I would locate these logs and wh...
Hello everyone.Recently I have stumbled upon a peculiar problem. When the call happens between two phones according to the topology below sometimes a one way audio problem occurs (one call out of nearly 20-30). Here is the figure: Cisco 8865 <===&...
Hello Colleagues, Hope you all doing well. I am new to CCME and I have got a small issue with configuring cisco ip phones on a CCME running version 10 to communicate with ip phones on CCME running Version 12. Currently these CCMEs ar...
Hello On my CUCM servers I see that the following certificate ( VeriSign_Class_3_Secure_Server_CA_-_G3) goes to expire on Feb,2020.So I would like to know what is the goal (usage ) of this certicate ?And how I can renew ( replace ) this certificate ?...