FAX over VOIP some times can be challenging. Finding the right configuration is sometimes difficult as it can be SCCP, MGCP, SIP or H323 or even combination of multiple protocol. More over, it can be fax pass-through, T38 or Cisco fax relay. 3rd party Fax Server in the IP side makes the situation a bit difficult.
I've created a project to find the working configuration of FAX in different combinations which is running on your network. Submit your topology and requirement along with protocol to use, we will test in lab. We will submit the configuration along with debug and troubleshooting tips for your reference if something goes wrong.
Click Hereto check the progress and submit your requirement. Hope this will help you.
Hello,when i call the pilot hunt number internally, three members of the group line ring but not the others, i have 7 members in all. note RNA Reversion Timeout is 180 and the Distribution Algorithm is diffuser Thanks,
Hello, I am looking to see if there is a way to setup a notification of a device coming online through CUCM. I have phone tickets that I check on each phone manually to see if it has gone online to close the ticket and I would like to know if I can set up...
HiI have CUCM 12 and ip phone 7821CUCM, IP phone and ISR Router with Vlan sub interface are connected on the same 9200 poe switchCUCM IP adress 192.168.10.2/24CUCM gateway 192.168.10.254DHCP pool in CUCM 192.168.10.100 to 192.168.10.200 VLAN 12...