Fax over IP Troubleshooting Basics

4223

Views

Helpful

Comments

edited on: ‎03-12-2019 ‎09:33 AM

Fax Over IP Troubleshooting Basics - This document provides a three stage model developed by Cisco TAC for efficiently resolving FoIP issues. This document is applicable to troubleshooting passthrough, Cisco Fax relay, and T.38 fax relay.

Latest Contents

Cisco ASR 900 Series 6-Port E&M Module Power Consumption

Created by h1363v on 01-25-2020 03:52 AM

Hi Guys,In Cisco Power Calculator and for ASR-903 device there is no choice for 6-port E&M Module (A900-IMA6EM) and also there isn't any point about power consumption of this module in the documents.can anyone help me and give me a roughly estimation ... view more

CME QUESTION PHONE FIRMWARE

Created by cigalahgroup on 01-24-2020 10:27 PM

I have seen some times that some firmware are added using extension. Loads and some times without extensions.7911 is .Loads and 7940 is without ... Why is this ??

CME 8.6 and Multicasting

Created by cigalahgroup on 01-24-2020 10:24 PM

Hello,I have Cisco 2851 Router basically used for ip telephony CME 8.6 with a 3650 POE switch configured with 2 vlans10.100.0.0 DATA10.101.0.0 VOICEI need to configure the MULTI CASTING using the ip 239.1.1.1. The multi casting will be used for MOH and pa... view more

Region System Defaults and OPUS

Created by j.dewiele on 01-24-2020 02:52 PM

Hi, I want to use OPUS at 510kbps for most of my calls between sites. So it makes sense to set the system default for interregion calls, and intraregion as well for that matter, to 510Kbps. However the maximum setting is only 256K. Am I missing somet... view more

MediaSense Search and Play with NAT

Created by tato386 on 01-24-2020 02:27 PM

I have a MediaSense V11.5.1 server that I have open to the Internet for the Search and Play feature. I am using a one-to-one NAT and have TCP/8440 and TCP/8446 open. Users access the server using a FQDN and can login and scroll/search the medi... view more

CreatePlease to create content