cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

High Availability Upgrade Procedure for Cisco Unified Communications Manager Releases 8.0(2)—9.0(1) to 9.1(x)

552
Views
0
Helpful
0
Comments

Introduction

This document provides procedures for performing a high availability upgrade to Cisco Unified Communications Manager (Unified Communications Manager) Release 9.1(x) from Releases 8.0(2) through 9.0(1).

About high availability upgrades

Perform the upgrade in two stages:

  1. 1  Virtualize the current Unified Communications Manager release.

  2. 2  Upgrade to Unified Communications Manager Release 9.1(x).

The procedures in this document support high availability for both stages of the upgrade.
This document is applicable to Unified Communications Manager clusters with the following environment:

  • Any of the following Unified Communications Manager Releases are installed: 8.0(2) through 9.0(1).

  • None of the current Media Convergence Server (MCS) servers support Unified Communications Manager

    Release 9.1(x).

  • You require high availability during the upgrade process.

  • No changes are required to the IP addresses or hostnames for the Unified Communications Manager upgrade. If you need to change IP addresses or hostnames, you must do so in a separate maintenance window, prior to the upgrade. For more information, see Changing the IP Address and Hostname for Cisco Unified Communications Manager, Release 9.1(1).