In order to access the Cisco Unity Express voice mailbox from a Public Switched Telephone Network (PSTN), these two options are available:
Call the Cisco Unity Direct-Inward-Dial (DID) voice mail number, and then press the * key. It prompts the subscriber to enter the user ID and password.
If a subscriber wants to enter only the password and not the user ID, specify the preferred PSTN, either home or cell, of the subscriber for the Cisco Unity Express user, and configure the phonenumberE164 parameter for the user.
Hi!I have a Cisaco router 2821+CME with 9 port swith ethernet module.How can I connect voip phones to my router through ethernet switch module inside router.I tried address interface vlan - without results. Help me please.
In our enterprise, the network topology is hierarchic: (see in the old architecture image attached) It uses static routingThe PC B can ping to PC 2The PC A can ping to PC 1All traffic routed to the head office only Any traffic routed to ...
The following is the message I get when the post install / installing db components are at about 83% complete. I have rebuilt the server as multiple TAC cases have revealed that my CUCM server is possibly corrupted. This is the exact same thing that happe...
Hi.. could you please confirm how much bandwidth require if one user dial Jabber to Jabber voice and video calling.Actually facing issue that user is calling another user (Jabber to Jabber) and there is one way audio only.both user sitting on differ...