Change DNS IP Address on Call Manager Publisher 10.x
First Step on Call Manager CLI
In order to update the DNS's Ip adress in Call Manager 10.5 what needs to be done is to access the CLI connection of the Publisher and type the following command:
“set network dns primary/secondary <ip address>"
Second Step go to PLM
Go to "Prime License Manager" and delete the instance associated with the Publisher.
After going into "PLM" go ahead and copy the information of the Publisher where you will be updating the DNS's Ip address and then click delete at the right side. After deleting it go back to CLI and apply the change. Note: A new "WARNING" will show up saying that "This will cause the system to temporarily lose network connectivity" please make sure to inform that to the customer before typing "y" which confirms the change. The best recommendation is to do it after business hours or in a maintenance windows.
After applying the new configuration, go back to "Prime License Manager" and click "Add" then copy the same information that you wrote in the Note Pad, make sure the customer is using the same password and username used to access CLI and click "Test connection" make sure to get a successful message at the top and press "OK". After doing that you will be back at the main screen of "PLM" then go and click "synchronize now" to get the instance for the Publisher back in Prime License Manager.
* That will complete the process of changing the DNS's Ip address on the Publisher *
Note: Repeat the process on the Subscriber if needed, take in mind that sometimes it will not be required to delete information in "PLM" for the Subscriber.
1- Type the command "set network dns x.x.x.x" on CLI; you have to have a primary IP address but you can also add a secondary IP in case you have a second dns server.
2- Go into PLM, copy the information for the CUCM pub and then delete the instance.
3- Make sure that the info on PLM has been saved and now feel free to type "Y" to apply the change.
4- After the change has been made go back to PLM and add the Publisher one more time using the same info saved on step 2.
5- Correct, if you only have one server on PLM you can ignore the rest. Just add the PUB and you will be fine.
Hello All, My organization would like to integrate a future system using Rest API and also most importantly integration our ticketing system (IVANTI "HEAT") so that the agents would not have to have multiple windows opened at all times because they a...
I have this idea for video conference security. In my idea there is encryption on an end to end connection with ssh that has video encryption and sound encryption for ultimate security with alternating variables in the sound and video .I invented a n...
Hello,I need Support ASAPI have problem that users with correct service profile and IM & P option check configured not show in presence topology in IM and PresenceI try many things and restart and on troubleshooter I see unassigned users so I assign p...
Hi,We have a 3945 with Version 15.5(3)M5 with CUCM 10.5 We have a new ITSP provider that require authentication. We have configured the authetication in dial-peer level:dial-peer voice 20 voip
description ** Outbound SIP-ISP **
Hello,we change our ISP from ISDN to SIP. With the new ISP we use SRTP. With our phones it is no problem to call via this connection. The phones have certificats and all is fine. But with our VG310 i have a question. I know i can connect the VG310 via TLS...