Low Latency Queueing (LLQ) is the key prioritization technique for enabling voice and data integration.
To configure Low Latency Queueing (LLQ), perform these steps:
Create a class map for Voice over IP (VoIP) traffic, and define a match criteria.
Create a class map for VoIP signaling, and define a match criteria (optional).
Create a policy map, and associate it to the VoIP class maps.
Enable LLQ by applying the policy map to the outbound WAN interface.
These documents provide useful information on Configuring Class-Based Weighted Fair Queuing (CBWFQ) and LLQ. They also provide a number of other good sources on configuring Quality of Service (QoS) for voice:
I have a big group of Directors that want to keep Call waiting option on their primary extensions but be able to log into Finesse to view their agents. What are my options? I added an agent extension but still only works if all lines are set to Max ...
Hello,When a user connects to our Meeting via https://join.xyz.com, they will join successfully, if they disconnect or close their browser (in this case chrome) and try to connect again to the meeting, they will not be able to join again, unless they chan...
Dear All, we are using unity version 12.5. we are getting a message in smart licensed portal (unity connection basic messaging user license ) is insufficient. currently the number of user 115.we purchased bundle license BE6K-STA...
Hello,deployment of CMS 2.5.2 for a customer in progress here. The cluster is made up by 2 nodes (say 10.10.10.1 and 10.10.10.2). Below described behaviour was noticed.Occasionally (roughly 1 time a day) the WebRTC access splash page does not show as...
I experienced an issue when using the API commands on a Codec Pro vie the serial port: the command:xCommand Phonebook Search PhonebookType: Corporategives this response:*r Result (status=Error): \x0D\x0A*r Result Reason: "Unknown command"\x0D\x0A*r R...